Remote ID Now Broadcasting with new firmware v1.1.54 for the EVO II V3 series

[Videoguy4u]

I jut talked to richard at Autel and he researched that the RID problem, He says it only broadcast on Android Phone. Wondering if someone can any one verify this?

 

[christr]

I jut talked to richard at Autel and he researched that the RID problem, He says it only broadcast on Android Phone. Wondering if someone can any one verify this?

I've tried using an android phone to receive it. No luck. Also most iPhones have trouble with receiving remote id of any type except wifi because of apples policies on getting raw data.

 

[Mark11]

I installed all the latest updates and the Controller for my V3 says its broadcasting but Drone scanner comes up with zero after I lift off.

 

[DronePilotUser]

I installed all the latest updates and the Controller for my V3 says it’s broadcasting but Drone scanner comes up with zero after I lift off

Is anybody out there have the Autel Evo 2 Pro 6K V3 and can confirm that RID is actually working? I have not been able to verify that is actually broadcasting at all.

 

[christr]

Is anybody out there have the Autel Evo 2 Pro 6K V3 and can confirm that RID is actually working? I have not been able to verify that is actually broadcasting at all.

Noone has that I know of except a couple of folks with commercial drone scanning systems. So none of the generic or consumer accessible RID apps have been able to see any of the Evo 2 V3 series (Pro, Dual, RTK, Enterprise). Nor has anyone seen the Max series on a consumer RID app.


--Chris

 

[DronePilotUser]

Noone has that I know of except a couple of folks with commercial drone scanning systems. So none of the generic or consumer accessible RID apps have been able to see any of the Evo 2 V3 series (Pro, Dual, RTK, Enterprise). Nor has anyone seen the Max series on a consumer RID app.


--Chris

Thank you for the info .

 

[ryanpasin]

Hello everyone,

I had a similar question and issues a few months ago. The firmware update released in January allowed the Evo 3 to start broadcasting. However, if you're not seeing the aircraft while using Drone Scanner or Open Drone ID, it may be due to the equipment you're using to detect the drone's broadcast. Apple products often do not support scanning, and not all Android devices work either. Additionally, certain settings may need to be adjusted within each app. After trying multiple devices, I found success with the Samsung Galaxy Tab A7 Lite.

Here's a GitHub link with information about supported devices and other details related to Remote ID:GitHub link

If you have an Android device not listed and need to check its compatibility with Remote ID, you can try downloading a program called AIDA64 onto that device. After downloading, check the Network settings tab in the AIDA64 app. It should indicate whether Wi-Fi Aware and Wi-Fi Direct are supported or unsupported.

Additionally, please adjust the following settings in the Drone Scanner App: Bluetooth scan priority and expiration time. Lower the expiration time to under 30 seconds (default is 600 sec) and set Bluetooth Scan priority to low. Images detailing these adjustments are provided in the attachments below.

Here

 

[Spoutnik17]

I have the EVO II Pro v3 with the Smart Controller and I was able to the the RID using Air Sentinel. Even with the drone not flying (as mine don't want the motors running).

 

[christr]

Which firmware version do you have? I tried both my Evo II 640T v3 and my Max, and still don't see either of them in Air Sentinel. I see myself (my phone) but not the drone.

thanks,
--Chris

 

[Spoutnik17]

Which firmware version do you have? I tried both my Evo II 640T v3 and my Max, and still don't see either of them in Air Sentinel. I see myself (my phone) but not the drone.

thanks,
--Chris

Hey Chris,

It seems to use bluetooth for RID so turn it on on your phone.
Smart Controller app is v3.1.107 (I had to downgrade it as it came with v3.1.108 out of the box)

Max

 

[jalavahini]

Hi All,

If anyone of you have this Autel Firmware Version, i.e., V1.1.54 in your archive, kindly share with me. My E-mail ID [email protected]

Pleas do the needful. I will be really grateful to you.

 

[Bugsy]

Coming to the party really late but... My E2Pv3 is not showing remote id in drone scanner either. HOWEVER, I tried it on Air Sentinel and the E2Pv3 showed up fine AFTER I turned off my WIFI and left it on Bluetooth. This was also while NOT in flight, but on my desk in the man cave. I have tried OpendroneID, and several others without success. Terrible to say, I have not launched it yet due to weather but was told it should broadcast and be picked up by other remote id apps while in flight. Gonna try when weather clears better.