Autel Explorer V2 Updated!

[hewell]

Hello everyone, yesterday came another update to the Autel Explorer APP V2, V2.0.33 for android and V2.0.21 to iOS.
Changelog said: Fixed a few known issues to enhance the system's performance.
I notice the different from V1 than I can't hear "flying to waypoint number".
Happen the same to you?
Thanks.

Link to the app: Autel Explorer V2-Autel Robotics Enterprise Drone, Quadcopter & UAV for Sale | Leader in Drones

 

[Malli35998]

I recently updated one of my Enterprise V2 drones to Autel Explorer V2 V2.0.33 and V2 Official Firmware to 2.4.43 for V2 Smart Controller. See screen captures below.

EVOIIEnterpriseRelatedDownloads-AutelExplorerV2

www.autelrobotics.com

EVOIIEnterpriseRelatedDownloads-V2OfficialFirmware

www.autelrobotics.com

The updates seemed to go fine. This morning I flew my first test flight/survey. The first flight and 1st portion of the survey seemed to go fine. No obvious issues, normal operations. The problems started after a battery change.

After changing the battery, I hit RESUME and blue aircraft (Start Mission) symbol. The drone immediately took off with no Pre-Flight Check screen and in FLOAT Positioning (vs FIX) so the drone was not in RTK positioning mode. I let it finish the survey. The drone landed safely. I decided to try and fly a brand new survey. Once I got the Pre-Flight Check screen I noticed it indicated the Flash Storage was Full. This did not make sense to me. Before I started the survey I reformatted the SD card as I do with any new survey. I use only 256GB SD cards. It looks like the Save Location got changed from SD Card to Flash Card. I have never used Flash Card as the Save Location.

Too many issues so I plan to downgrade (rollback) both the Autel Explorer App and the drone firmware to the previous versions. I also submitted these issues to Autel Support.

 

[hewell]

I had done more than 10 flights after upgraded and this never happend to me, I wait to get fix GPS position, I marked auto connect RTK, and press flight. With one 256 microsd i got error but it happend with the previous firmware to so...