- Joined
- Dec 30, 2017
- Messages
- 4
- Reaction score
- 0
- Age
- 42
I have placed X3P_FW_900M_V2.0.12.bin file onto a SD card and placed that in my drone. Then it began to update.
It said that it was successful so I removed the battery ready to do it a further 3 times and lights flash yellow then continue to constantly beep and all 4 corners are flashing red.
The gimbal moves when I first switch it on.
The controller says "Connect your aircraft".
When I click any button it says "Invalid command".
It said that it was successful so I removed the battery ready to do it a further 3 times and lights flash yellow then continue to constantly beep and all 4 corners are flashing red.
The gimbal moves when I first switch it on.
The controller says "Connect your aircraft".
When I click any button it says "Invalid command".
Last edited: