Beta version 2.7.30 The Panorama stitching has flows and degrades the final image.
*-*-* Give us a choice, to stitch or not and proceed to the next Panorama without draining the already low battery ! !
**--** What's surprising is the same images when used in ICE come out good, Thanks to Microsoft for offering us such a wonderful but totally Free software and many choices.
The other PT Gui what a rip off. cost $149.99
*-* I found a way " To Stop Stitching Process " aster it starts stitching and on screen BW picture turns back in to color I switch Mode to Manual and then back to Panorama and start shooting again ! ! !
I had ordered 4 USB- C cables on one end and USB- A on the other this way I should never have to take out my Micro SD card again.
**--** WRONG, it does not work, Autel makes Small Stupid mistakes time after time when it comes to common sense !
My 7 inch Lenovo does not work as it has far too much delay showing the image, correct it please !
* * * * In Flight control Advanced settings, please lower the EXP to 0.06 at least to make the movements even gentler and smoother !
**--** I personally need my Flight Control, Sensitivity Yaw Movement lowered down to 04%
My Brake works great at 56% and Attitude set at 20%
* * * * * Why can't I set the Drone speed to 4, 5, 6, 7, 8, or any speed that suits my video needs, not just fixed 11 mph with Obstacle avoidance even in Panorama Mode and every other Mode too.
**--** The Remote control battery very often needs charging, why you committed this " Sin " !
* * * My Typhoon H remote with a 7 inch screen use to last 3 to 4 times if not 5 times longer
The much needed certain wires are missing from the Newer Drone box.
Since this morning a number of times the Drone wanted to Roll back to 2.7.25 and after a few tries failed every time.
Right now its Upgrading back to 2.7.30 Beta version !
Autel should have provided a Dummy battery shell so we could have plugged in the charger for such BS and not drained the already Short Changed Battery ! !
Shame on you Autel, we seem to be your Field Lab.
Common sense says fix and finish your
EVO 2 Pro before you spread yourself out with so many Half Complete Drones.
We needed a swappable optical Zoom Lens up to 6X
Get this great software here:
Microsoft ICE
The other day as usual I went up and took pictures and when I came back, found No pictures !
Be sure to double check your delicate Micro SD is properly seated.
Here is a great tutorial about Way point mission just that he failed to get a good sound quality along with it !
My both pictures were with 12 images stitched with ICE by Microsoft and above all totally free !
Just came back after flying, before leaving I was careful to make sure my 256 Gig Micro SD was seated yet when I took off it said NO Card so I opted for Onboard card and shot my Panoramic and when I got home indeed the micro SD was out and yet protected from falling out by the card slot door.
Now I can't have excess to my pictures even after trying two different USB A hooked to my laptop and the USB-C to the Drone and powered up, what am I doing wrong here as I need my pictures ASAP.
In the mean time Autel has not replied to my messages, they would not as they are far too busy expanding their product line and all unfinished products with Stupid common sense issues that they choose to ignore.
We are the field lab for Autel with absolutely no support from them.
The newer firmware 2.7.25 I down graded to on both my Autel
EVO2 Pro from otherwise working far better with 2.7.30 too has flows, the video transmission stopped working and the screen froze turned BW, had to miss my shots and come down to re-boot the drone and remote as it happened a few times.
I out of desperation ordered yet another USB-A to USB-C 6 foot cable ( Proud owner of 5 useless cables and one more to try )
Please help !
PS, here is a picture as to how I protect my Micro SD card and door with a reinforced tape, you need to do the needful !
The last 3/8 of the tape on right of the picture I turned it back so it don't stick to the drone and I can gently pull to open the door.