When submit, please take the time to tell Autel some of your experiences, such as yaw and throttle being too sensitive, or there needs to be more play in the sticks. (This is just me because I like to film not race) I hope you understand what I’m trying to say. Also, do we have to be airborne in order to make any adjustments, why can’t we see what adjustments we’ve made once we get home and fine tune those adjustments?
Beta Testers
- Thread starter skipper1
- Start date
Have to second this - It's difficult to understand everything that a setting in the app does when we can't see what the possible options are without being connected to the aircraft and too often in flight. It also wastes battery time.
I've started testing the beta app on a secondary device when I can, but it's gone a bit slowly due to weather problems...
I've started testing the beta app on a secondary device when I can, but it's gone a bit slowly due to weather problems...
Well it’s been too hot and too windy here but it would be nice to be able to take your time and check out every single setting without being in the air. I put that in today’s submission.
CactusJackSlade
Well-Known Member
PingSpike
Well-Known Member
Those settings are stored in the drone, not in the app, hence needing the aircraft connected and powered on 
With the Beta iOS:
Gimbal speed adjustment does not work:
Yaw Speed adjustment overrides Precision Modes yaw degree per second setting making it inaccurate.
Histogram position reverts to top center.
Manual focus peaking reverts to off.
4k defaults to 60fps after being changed and then changing resolution.
Basically can't count on settings staying if you change something or reboot.
Can't see or adjust EV during a Mission.
Instead of just flying and getting the job done, one must constantly check every setting if something is changed or you start another flight.
Autel still has a lot of clean up to do.
Sent list to Autel, hope others forward their findings.
Gimbal speed adjustment does not work:
Yaw Speed adjustment overrides Precision Modes yaw degree per second setting making it inaccurate.
Histogram position reverts to top center.
Manual focus peaking reverts to off.
4k defaults to 60fps after being changed and then changing resolution.
Basically can't count on settings staying if you change something or reboot.
Can't see or adjust EV during a Mission.
Instead of just flying and getting the job done, one must constantly check every setting if something is changed or you start another flight.
Autel still has a lot of clean up to do.
Sent list to Autel, hope others forward their findings.
Last edited:
Similar threads
