BOOM ITS HERE!!!!

[jmason702]

SC is not fixed yet................

 

[Blade Strike]

Not sure, I picked up my 640T camera and they were testing the android tablet with RTK and it worked

They are probably running the imaged app.. I do believe that works. I haven’t reset the rc to clear the app update.

 

[jmason702]

Feeling good!!!

 

[mak__tub]

Alright, so this just gets weirder for me.

I figured out how to create my own ntrip caster. Connected base to it. Connected autel explorer to it. It says I logged in! And a successful connection!

Drone still won't fly... Still says there's an issue with rtk. All indications show that I have everything good to go but the app still says no to rtk.

I have the same problem. How did you deal with it?

 

[Blade Strike]

I have the same problem. How did you deal with it?if

You need a fix status to take off with RTK enabled. Does it stay in single or does it at least move to float?

 

[mak__tub]

You need a fix status to take off with RTK enabled. Does it stay in single or does it at least move to float?

Single

 

[Blade Strike]

Single

More than likely incompatible output format. You need to make sure the source is set to RTCM 3.x.

 

[mak__tub]

You need a fix status to take off with RTK enabled. Does it stay in single or does it at least move to float?

Autel Evo 2 RTK Series

 

[mak__tub]

More than likely incompatible output format. You need to make sure the source is set to RTCM 3.x.

 

[Blade Strike]

That doesn’t look like a valid mountpoint name . Should be mountpoint-protocol / mountpoint_protocol

If you can provide IP and port and can request names. Don’t need user info

 

[mak__tub]

That doesn’t look like a valid mountpoint name . Should be mountpoint-protocol / mountpoint_protocol

If you can provide IP and port and can request names. Don’t need user info

ip 95.163.249.164
port 2101

 

[Blade Strike]

The caster isn’t outputting available mountpoints, that tells me that something is not right with it.

 

[mak__tub]

The caster isn’t outputting available mountpoints, that tells me that something is not right with it.

Strange, but my gps / gnss receiver PRINCE I50 works with this ip and port

 

[mak__tub]

That doesn’t look like a valid mountpoint name . Should be mountpoint-protocol / mountpoint_protocol

If you can provide IP and port and can request names. Don’t need user info

if I use NEAREST_RTCM32 as mountpoint nothing changes. Connection is successful, but RTK is not ready

 

[Blade Strike]

if I use NEAREST_RTCM32 as mountpoint nothing changes. Connection is successful, but RTK is not ready

If it doesn’t even move to float, it’s not receiving valid data.

Have you sat and watched the connection? Does cycle connection or is it solid.

 

[mak__tub]

If it doesn’t even move to float, it’s not receiving valid data.

Have you sat and watched the connection? Does cycle connection or is it solid.

I sat and watched. The connection is not strong, it was such that the connection disappeared and appeared in a second.

 

[Blade Strike]

I sat and watched. The connection is not strong, it was such that the connection disappeared and appeared in a second.

So it’s cycling? Connect, disconnect?

Is this an enterprise or RTK model? If RTK what what version

 

[mak__tub]

So it’s cycling? Connect, disconnect?

Is this an enterprise or RTK model? If RTK what what version

Autel Evo 2 Pro 6K RTK

 

[jmason702]

V1 or V2 ?

 

[Dave Pitman]

Autel Evo 2 Pro 6K RTK

V1 or V2 ?

The Evo2 RTk is only the v.1 chipset. The Evo2 Enterprise is v.2 chipset.