Autel evo firmware update release(Not the Beta but the official one).
- Thread starter jcmarceau
- Start date
I've been checking since they said the BETA would be going live in a few weeks (of our conversations)... Thanks for pointing this out -- will get the Evo connected and see what's new.
Jagerbomb52
Well-Known Member
Hongfei AR shared a link to the group: OFFICIAL Autel Robotics
Hello EVO Users,
Thank you for participating in the beta firmware testing and giving us helpful feedback. The V1.3.46 (V1.3.45 + bug fixes) is now officially released! It is available now via Explorer App OTA update. Comparing to the current official version V1.3.3.25, this update contains the following main changes:
- Added ‘Coaching Mode’ which allows users to connect a second controller with the aircraft for flight
- Optimized RTH accuracy in weak GPS condition
- Optimized camera IQ and exposure
- Improved anti-drifting ability after initial taking off (Improved convergence rate of aircraft’s initial heading deviation)
- Added battery over-discharging warning prompt
- Added ‘Safe to Land’ prompt on RC
- Bug fixes
The access to the current beta program webpage has been closed. The download page of the V1.3.46 bin file for the manual firmware update use is here: https://auteldrones.com/pages/downloads
For additional help and technical support, give us a call at 1-844-MY-AUTEL (692-8835), email us at [email protected], or chat with us online at AutelRobotics.com.
Thanks for your support!?
Hello EVO Users,
Thank you for participating in the beta firmware testing and giving us helpful feedback. The V1.3.46 (V1.3.45 + bug fixes) is now officially released! It is available now via Explorer App OTA update. Comparing to the current official version V1.3.3.25, this update contains the following main changes:
- Added ‘Coaching Mode’ which allows users to connect a second controller with the aircraft for flight
- Optimized RTH accuracy in weak GPS condition
- Optimized camera IQ and exposure
- Improved anti-drifting ability after initial taking off (Improved convergence rate of aircraft’s initial heading deviation)
- Added battery over-discharging warning prompt
- Added ‘Safe to Land’ prompt on RC
- Bug fixes
The access to the current beta program webpage has been closed. The download page of the V1.3.46 bin file for the manual firmware update use is here: https://auteldrones.com/pages/downloads
For additional help and technical support, give us a call at 1-844-MY-AUTEL (692-8835), email us at [email protected], or chat with us online at AutelRobotics.com.
Thanks for your support!?
Ansia
Well-Known Member
Do a gimbal calibration on a level surface and when finish shutdown remote and after evo and restart remote and then evo. Give it a try
Ansia
Well-Known Member
Currently charging my other batteries for their update. I'll give it a try. Thanks
Compass calibration now works nose down like supposed to be in the manual...before was just working nose up. Good thing fixed.
My gimbal -- is the closest to level -- it has demonstrated lately. After calibration on the new firmware this is what it looks like.
Seems as people update firmware from version to version -- it either comes back after update level or not level??
It really has a mind of it's own. While I noted mine off on day one - it demonstrated better and never got my looking at it so hard again until I updated so many times on the last stable firmware. The reason I mention it this way -- you have run updates multiple times for multiple batteries.
So it does not matter if your Evo is like mine -- and was in some type of known "Firmware Loop" -- in the last stable release -- or not. You would assume it is only updating the battery -- but you never can be certain.
Edit -- the blanket you see is me testing the FOA for proper on/off and switching from ATTI to STARPOINT - it passed.
The OTA update failed on mine as always with Autel's known RC Player bug.
So I've had practice with this...
As always, I power down everything -- manually download and copy file to Evo's SD card -- power everything back on -- everything falls into sync -- updates -- shows success.
Just have to wash rinse and repeat for each battery. ? ...and hope the gimbal does not have a brain fart.
Fingers crossed ? my "firmware loop" issue like on the previous stable firmware -- does not return -- now that the firmware is no longer BETA in my Evo.
I am so ready to get this thing back in the air! ???✈
Last edited:
For the battery update just look in the apps under firmware version when you put a new battery in and you will see the version before updating the battery and go look after updating and you will see new battery version. And the updating loop is gone with this new updated. Also me too rc player bug when updating over the air but when updating with sdcard it is ok.
Ansia
Well-Known Member
It worked. It is now leveled. Will have to take it up into the air and see what's up. I appreciate it.
My 3 batteries updated OTA. Downside I just noticed hairline fractures in my antennas. Will have to keep an eye on this.
The only OTA mine tried and failed -- seemed like it was going to hang/freeze at 99 -- but something finally popped it to show me the update statuses while waiting... and showed the known "RC Player not recognized as updated" issue as already explained above.
This is the failure of OTA for me -- when your remote says TRY AGAIN... lol and misspells "remote" as REMOTER .. ?
Just "sticking" at 99 -- may be not waiting long enough -- as it did take it a few minutes just on 99 percent...
OR -- I never discredit that something just went screwy -- with no cause or insight into it further.
also, bugs manifest in different ways
Look don't get me started on "quality" again... I am going to nickname mine FORD!
Or for those who many not know what this acronym really means:
fix
or
repair
daily
Ansia
Well-Known Member
Hope your Ford is an F150 truck. If you get a Focus or Fiesta, just throw it away.
Tufargon
Well-Known Member
- Joined
- Jun 3, 2017
- Messages
- 2,086
- Reaction score
- 995
- Age
- 55
Ansia
Well-Known Member
It has many acronyms.Look don't get me started on "quality" again... I am going to nickname mine FORD!
View attachment 3938
Or for those who many not know what this acronym really means:
fix
or
repair
daily
You so funny - I am torn -- now that I have a menu...
I love:
Fireball On Rear Denting
(No real rear sensors)
or a toss up between;
Forced On Reluctant Drivers - or - Fix Or Recycle Dilemma
(Overall - we are the BETA testers -- does not matter if it says STABLE or BETA on anything) ?
Here's a better idea of it ?
Just like the unicorn called the Yugo -- i thought there once was a -- concept -- BINGO!
en.wikipedia.org
Just like the unicorn called the Yugo -- i thought there once was a -- concept -- BINGO!
Ford Mondeo Sport - Wikipedia
