Enterprise Firmware V2.1.67 and Smart Controller App V1.0.65

[Blade Strike]

Can I use the batteries from my Evo 2 V1 to my Enterprise?

Yes, always run the newest firmware if available. .16 won’t hurt v1. Just ignore the update message on the v1 craft, if you get one.

 

[edgardcafe]

Yes, always run the newest firmware if available. .16 won’t hurt v1. Just ignore the update message on the v1 craft, if you get one.

Just to be sure, to update each battery I just need to run the update again right ?

 

[Blade Strike]

I would check your firmware windows and see what the batteries are on. Can save you some time. If they do need .16 applied, then yes, please run the update again.

 

[edgardcafe]

I would check your firmware windows and see what the batteries are on. Can save you some time. If they do need .16 applied, then yes, please run the update again.

Thank you so much for your help ! I appreciate it

 

[nh phantom]

I did OTA updates for the enterprise. No issues at all. All my batteries were .16 already. All is good!!!

 

[edgardcafe]

Please download this, Model-C_WiMaxPad_FW_V2.1.67.zip

Extract all files on to a freshly formatted sd card. Power on SmartRC and let it sit at splash, don’t touch it.

Now put the sd card in the craft and power it. You should see a black upgrade box appear on the SC in a minute or two. Please don’t touch the RC during this update.

To update my batteries from my V1 Evo 2P I had to follow those steps and successfully updated, so now I can use all the batteries to my V1 Evo 2 and my Enterprise V2. (Now all the batteries are with the version.16.0) Before doing that, I have tried several times with OTA but didn’t work.
Thank you for your help!