Do you keep the sticks attached in bag?

[loyukfai]

Seems a bit tight but I don't want to attach and remove them every time

 

[Jockel2000]

Here's what I do:
After screwing it on, I turn the controller to the back. There I find two small holes (top)
There are screws in the holes, but they are so deep that you can use the two holes as a holder for the sticks by screwing the sticks in.
Thus, they are always tidy and do not interfere.

 

[Wayne Maine]

Try flying without the sticks. Its a very smooth operation. You are not overcontrolling.

 

[kenautelevo2pro]

this is what i use: Slick Stick Mount for Autel Sky Controller - Etsy

 

[ccadden]

If you move the dividers you can make more/better space

 

[geekdaddy]

A few good options for 3d printing on thingiverse. The one shown in this thread works well and doesn't add significant bulk to the controller... 3D printed accessories.

 

[jcamevo]

Are there any other options besides RCgoing to get the sticks ?

 

[yiyunet]

Seems a bit tight but I don't want to attach and remove them every time

move the dividers

 

[Eagle928]

I picked up a $15 backpack from ebay that allows plenty of room for the RC to sit nicely in the bag with the sticks attached and no pressure on the sticks.

 

[Eagle928]

The air packing firms up that space unless I want to take along a camera. The paper clip is holding up the flaps that lay down over the drone and RC. Yes, I know the props are not positioned right. I didn't notice this when I took the pics. They are normally in the correct position for storage.

 

[Detritalgeo]

I have the GPC case for the Lite+ so stick stay on. The Nano+ has the OE soft case so sticks come off and ate stored in the Dobo holder.

 

[loyukfai]

Hi guys thanks for the input.

Just wondering, if there are any "short sticks" for this controller?

Cheers.

 

[ADOC]

Here's what I do:
After screwing it on, I turn the controller to the back. There I find two small holes (top)
There are screws in the holes, but they are so deep that you can use the two holes as a holder for the sticks by screwing the sticks in.
Thus, they are always tidy and do not interfere.

Seems to work fine for me too.
Buying some red ones tho, easier to find if I drop one.

 

[ADOC]

I picked up a $15 backpack from ebay that allows plenty of room for the RC to sit nicely in the bag with the sticks attached and no pressure on the sticks.
View attachment 15476

Best "Hack" ever, plenty of room for drone, controller and loads of GoPro stuff too!