Sneak Peak At Evo Lights

Jagerbomb52 · Sep 14, 2019

Ansia said:
I read somewhere there is an lumecube holder for the Evo.

After market holder, has nothing to do with Autel and their warranty.

Ansia · Sep 14, 2019

Agustine said:
After market holder, has nothing to do with Autel and their warranty.

Lumecubes have their own power source. It should not affect the warranty whatsoever.

In another note. Love the moose.

Jagerbomb52 · Sep 14, 2019

Anything added that is not made by Autel......3rd party add on,s such as the cubes voids your warranty.

LeafPeeper · Sep 14, 2019

DJI says the same thing. However unless there is clear evidence of damage caused by an unauthorized accessory, they'd have no way of knowing.

LP

Coolerman · Oct 15, 2019

It's been a month now. So are these any closer to release?

Jagerbomb52 · Nov 5, 2019

Saw this video which looks like the same lights. Still not out apparently but will be soon.

Autel EVO Fox Fury Lighting | Ultimate Visibility

Boyblueeye · Nov 7, 2019

For the people who are interested , they are available now for pre order at droneworks.com for US$149

macoman · Nov 8, 2019

Boyblueeye said:
For the people who are interested , they are available now for pre order at droneworks.com for US$149

Expensive as well for just damn front lights

Ansia · Nov 11, 2019

Autel Robotics just posted a video with the lights from Fox Fury.

Jagerbomb52 · Nov 11, 2019

Here is the guide for them

Catweazle · Nov 22, 2019

Lucky guys. Aussie pilots still kept in the light wondering when we can be allowed to fly in the dark. Methinks it will take years to decide.

quinn karter · Nov 20, 2020

I COULDNT FIND AN ADEQUATE RIG SO I MADE MY OWN. It's impressive. Aprox 15,000 to 20,000 lumens, at least 1 hr battery life at full power solid spot.Take a look at the pics took at about 200 ft. The light was made from taking apart two 10,000 lumen headlamps spot lights. Because the original housing and batteries were too heavy, I discarded those parts. I discarded the heavy heat sink and simply exposed the hot led plate to the air and prop wash. I used a small lightweight 3s 11.1v lipo battery to power the 14 leds. It only resulted 5 lost minutes of flight time. I made it very light.