Smart Controller SE V2 Firmware update

[Pokemon77]

Hello together,

after i have updated the firmware of my Evo Lite 640T Enterprise via OTA with the RC, the pairing RC to Drone gone lost.
Does anybody know how to update the RC ? I am after 2 nights confusions totally lost.

1000 thanks for help

 

[Max Bavarian]

Hi There,

Same here.
No connection to the aircraft.
I am desperate too..
Autel Support gave me new firmware for rc and aircraft. Didn't work either with sd update. Over the Air Update failed and got stuck at 98%

 

[Pokemon77]

Hi There,

Same here.
No connection to the aircraft.
I am desperate too..
Autel Support gave me new firmware for rc and aircraft. Didn't work either with sd update. Over the Air Update failed and got stuck at 98%

Exactly same here. Aircraft Lights were green after maybe 15 minutes but RC progress stops at 98%.
The update files from the the autel support didnt work. Interisting is, two days ago on 12 May a new firmware came out on their website. Aircraft version 1.0.3.71 and RC version 1.0.3.65. These files are newer than the supported files and nowhere to download on the website, only release notes. But i found it in the memory of the RC. Located at /storage….. So ive downloaded it to SD and Firmware update worked fine with the aircraft. But i dont know how to update the RC. The RC process must be different to the aircrafts process.
If anybody knows how to do this, i send him some Satoshis

 

[Max Bavarian]

Hi there,

Interesting!
Same with my drone.. The Firmware, Autel provided me, is definitely faulty.

The RC has to be updated in a different way. You need the firmware on a FAT32 formatted usb stick(!), no micro sd. This stick you have to put in your classic usb port underneath the rubber cover of the RC about one minute after powering on the rc.. Then it will enter the update process..

 

[Pokemon77]

Hi there,

Interesting!
Same with my drone.. The Firmware, Autel provided me, is definitely faulty.

The RC has to be updated in a different way. You need the firmware on a FAT32 formatted usb stick(!), no micro sd. This stick you have to put in your classic usb port underneath the rubber cover of the RC about one minute after powering on the rc.. Then it will enter the update process..

Thank you !!
The update process startet now with the correct version, but after some minutes it failed again indicating error code 10011 - What the hell is that now?
Did it work on your RC successful ?