New Update For Evo Owners

skimcoat · Jul 22, 2018

joshmentele said:
According to the Autel release notes, they added a "ludicrous" mode. Apparently Autel's "Sport" mode.

i saw it in the release notes but not in the app?

DadCorso80 · Jul 22, 2018

Its in the App, General Settings, then Flight Control

MitchNC · Jul 22, 2018

Danny posted a video on YouTube. 45 mph. Crazy.

skimcoat · Jul 22, 2018

joshmentele said:
According to the Autel release notes, they added a "ludicrous" mode. Apparently Autel's "Sport" mode.

odd i only have 11,22 and 34 mph and im current with updates?
i dont have a ''speed mode'' icon?

Tufargon · Jul 22, 2018

skimcoat said:
i havent seen that feature,where is it?

Go into settings and then flight mode will have it.

skimcoat · Jul 22, 2018

Tufargon said:
Go into settings and then flight mode will have it.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

ive watched the video and have done 2 updates and am current but i dont have the speed mode icon
ive lingered way long enough in app for a update but none pops up,,,odd

Tufargon · Jul 22, 2018

skimcoat said:
ive watched the video and have done 2 updates and am current but i dont have the speed mode icon
ive lingered way long enough in app for a update but none pops up,,,odd

I'd just contact Autel. Sounds like not all updates actually took.

skimcoat · Jul 22, 2018

Tufargon said:
I'd just contact Autel. Sounds like not all updates actually took.

agreed

Maxheadspace · Jul 22, 2018

SteveNunez said:
I agree- I initialized the "gimbal calibration" and the gimbal went thru some movements that seems to find it's end points and then sets the gimbal leveling- it worked really well for me. (when you press "Start" the gimbal goes thru the calibration despite the app not telling you it's actually in progress- Autel needs to add an "In Progress" message or "Calibration Started" message to confirm the gimbal is indeed calibrating then finish it with a "Calibration Complete" message.)

Thanks Autel for addressing this issue.

(Please add the capability to start the front "red lights' when recording as opposed to the option of simply Turing them on/off.)
(Also add the capability of allowing the user to dictate the gimbal tilt wheel direction- right now it only allows the user to push left and the camera raises- it would be nice to allow the user to reverse the direction if desired.)

They must have listened to you. When I upgraded to 1.2.3 this afternoon, there was a notice that gimbal calibration was underway. And when it finished, it said calibration complete. I’m using iOS beta, so maybe it’s unique to Apple version.

Maxheadspace · Jul 22, 2018

skimcoat said:
odd i only have 11,22 and 34 mph and im current with updates?
i dont have a ''speed mode'' icon?

Did you shut everything down and reboot?

skimcoat · Jul 22, 2018

Maxheadspace said:
Did you shut everything down and reboot?

yes,even tho i didnt get a notice to reboot,all seems ok other wise

Bartek · Jul 23, 2018

skimcoat said:
odd i only have 11,22 and 34 mph and im current with updates?
i dont have a ''speed mode'' icon?

I had the same problem. Try to reinstall Autel Explorer Application. This feature is embedded in a new version of the app.

skimcoat · Jul 23, 2018

Bartek said:
I had the same problem. Try to reinstall Autel Explorer Application. This feature is embedded in a new version of the app.

thx,will try

skimcoat · Jul 23, 2018

Bartek said:
I had the same problem. Try to reinstall Autel Explorer Application. This feature is embedded in a new version of the app.

great,that did it,appreciate the help

MitchNC · Jul 23, 2018

My firmware update keeps failing right at the end. Reboot both and try again.
Three times so far.

When I rebooted this time, Explorer isn't prompting for an update, but it definitely said the update failed.
Not sure what to do.

Tufargon · Jul 23, 2018

Might try uninstalling the explorer app then reinstalling it and then try to do the update. Also maybe redownload the update. It may have gotten corrupt during download.

MitchNC · Jul 23, 2018

I'll try that. Is there a way to force it to recheck for the update?

Tufargon · Jul 23, 2018

MitchNC said:
I'll try that. Is there a way to force it to recheck for the update?

That I'm not sure of. Autel would be able to tell you that though.

MitchNC · Jul 23, 2018

Ok, I contacted Autel. Here's the list of current firmware versions for the different components.
All mine match.

EVO Firmware Release Notes | Autel Robotics