Just ordered mine from WELLBOTS. They said they have them in stock. Should ship early next week. I paid for one day shipping.

[RedAlert624]

Do you trust them Red? I'm ready to push the button because of the pictures of the stock I think. What do you think?

Check this out before you order

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Cicero24]

 

[Cicero24]

I gave it a shot. Wellbots is on the authorized vendor list and Autelpilot.com is a subsidiary of them. I figured I would give it a go. I seen that other guy on the forum has his from them that he preordered in January. There’s been videos popping up here and there with people having them here in the States. I will update as things progress.

 

[easyheimer]

The reason why the number is the same from AutelPilot.com is because they use the same text service. That happens quite frequently with other stores as well.

Also, I'm almost ready to cancel my order after hearing all of thse negative stories from people that have received theirs already. Beware as it seems all of these defective units came from AutelPilot.com which tells me they are preproduction, pre quality control units. I'm guessing they shipped even before their delay for bugs. Here's one of the posts:

Summary of the first two flights:

Autel Evo 2 Pro" Only 7 to 11 gps connections before take off and messages saying that the home point maight be innacurate for RTH (The RTH is recorded after take off).

Mavic 2 Zoom: 17 gps connections before take off

Autel Evo 2 Pro: Hover and flight characteristics are on pair of Mavic 2 Zoom.

Autel Evo 2 Pro: when recording (or not) in hovering position, the camera seems to move (tiny circular moves) frecuently. I guess it needs calibration.

Mavic 2 Zoom: Camera is rock solid

Autel Evo 2 Pro: Speed with the obstacle sensors activated is 18 or 36km/h

Mavic 2 Zoom: Speed is 50 km/h with the sensors activated

Autel Evo 2 Pro: During flight the signal transmittion was lost first at 750m and during the second flight, at 1200m. The RTH was activated and I couldnt switch back to normal flight once the signal was gained again. The drone landed the two times and I couldnt do anything to cancel RTH. Appreciate any help in here.

Mavic 2 Zoom. The signal transmittion was lost once, for a few seconds but regained and no problems after that.

About the camera, Ill try to upload some photos and videos in 5.5K, 30FPS later. The colors are not as bright as in the mavic zoom but on the Autel Evo 2 Pro it look more real.

The autel explorer needs a lot of work in my humble opinion. I couldnt asign functions for the rear buttoms. Every time I start the drone, the pitch gimbal limit goes to default values as well as the image transmission mode.

Couldnt assign a switch for the leds, and the voice command get easly activated. Couldnt find how to configure that function.

The pictures that Ive got on my phone when I used the Live mode are useless. Need to figure out how to set up this function too.

Then I tried a short active track flight. Just a walk on a road with bushes on one side. Just to make it shorter, the dorne hit the bushes and crashed. Hopefully there were no damages on any of the components.

I know that it doesnt sound too positive my comments but is what it is. I paid almost 2k for the drone and I dont think is quite on pair with the mavic 2 zoom. Lets see what happens with the upcoming firmware updates.

About the camera I cant say too much yet, but I will put a few pics and videos in 5.5k-30FPS so you can make your own conclusions.

 

[parkgt]

The reason why the number is the same from AutelPilot.com is because they use the same text service. That happens quite frequently with other stores as well.

Also, I'm almost ready to cancel my order after hearing all of thse negative stories from people that have received theirs already. Beware as it seems all of these defective units came from AutelPilot.com which tells me they are preproduction, pre quality control units. I'm guessing they shipped even before their delay for bugs. Here's one of the posts:

Summary of the first two flights:

Autel Evo 2 Pro" Only 7 to 11 gps connections before take off and messages saying that the home point maight be innacurate for RTH (The RTH is recorded after take off).

Mavic 2 Zoom: 17 gps connections before take off

Autel Evo 2 Pro: Hover and flight characteristics are on pair of Mavic 2 Zoom.

Autel Evo 2 Pro: when recording (or not) in hovering position, the camera seems to move (tiny circular moves) frecuently. I guess it needs calibration.

Mavic 2 Zoom: Camera is rock solid

Autel Evo 2 Pro: Speed with the obstacle sensors activated is 18 or 36km/h

Mavic 2 Zoom: Speed is 50 km/h with the sensors activated

Autel Evo 2 Pro: During flight the signal transmittion was lost first at 750m and during the second flight, at 1200m. The RTH was activated and I couldnt switch back to normal flight once the signal was gained again. The drone landed the two times and I couldnt do anything to cancel RTH. Appreciate any help in here.

Mavic 2 Zoom. The signal transmittion was lost once, for a few seconds but regained and no problems after that.

About the camera, Ill try to upload some photos and videos in 5.5K, 30FPS later. The colors are not as bright as in the mavic zoom but on the Autel Evo 2 Pro it look more real.

The autel explorer needs a lot of work in my humble opinion. I couldnt asign functions for the rear buttoms. Every time I start the drone, the pitch gimbal limit goes to default values as well as the image transmission mode.

Couldnt assign a switch for the leds, and the voice command get easly activated. Couldnt find how to configure that function.

The pictures that Ive got on my phone when I used the Live mode are useless. Need to figure out how to set up this function too.

Then I tried a short active track flight. Just a walk on a road with bushes on one side. Just to make it shorter, the dorne hit the bushes and crashed. Hopefully there were no damages on any of the components.

I know that it doesnt sound too positive my comments but is what it is. I paid almost 2k for the drone and I dont think is quite on pair with the mavic 2 zoom. Lets see what happens with the upcoming firmware updates.

About the camera I cant say too much yet, but I will put a few pics and videos in 5.5k-30FPS so you can make your own conclusions.

Thanks for the report. Not too encouraging at the moment. With the delays you would have thought it would be more ready for prime-time than it seems to be.

 

[Wayne Maine]

I am sure it will be in time a very nice drone for lots of folks. For now i am glad i canx and got another Evo.

 

[Northwood Mediaworks]

Ya, I appreciate your reivew Easyheimer... its this kind of information which is going to help me weigh my decision to go Autel over DJI. I think the combination of too early to market and covid19 is really going to make the evolution (pardon the pun) of the evo2 very slow, not sure I want to wait for it to improve when I want a new drone sooner than later.

 

[Tufargon]

It's not his review. It's a copy and paste of someone elses.
It's a horrible review since the person reviewing it doesn't even know how to cancel RTH. He obviously didn't read the manual. And the part about it crashing in the bushes? He messed with OA for speed test. Did he turn it off and then hit the bushes?
I wouldn't trust that review at all.

 

[hidroela]

The reason why the number is the same from AutelPilot.com is because they use the same text service. That happens quite frequently with other stores as well.

Also, I'm almost ready to cancel my order after hearing all of thse negative stories from people that have received theirs already. Beware as it seems all of these defective units came from AutelPilot.com which tells me they are preproduction, pre quality control units. I'm guessing they shipped even before their delay for bugs. Here's one of the posts:

Summary of the first two flights:

Autel Evo 2 Pro" Only 7 to 11 gps connections before take off and messages saying that the home point maight be innacurate for RTH (The RTH is recorded after take off).

Mavic 2 Zoom: 17 gps connections before take off

Autel Evo 2 Pro: Hover and flight characteristics are on pair of Mavic 2 Zoom.

Autel Evo 2 Pro: when recording (or not) in hovering position, the camera seems to move (tiny circular moves) frecuently. I guess it needs calibration.

Mavic 2 Zoom: Camera is rock solid

Autel Evo 2 Pro: Speed with the obstacle sensors activated is 18 or 36km/h

Mavic 2 Zoom: Speed is 50 km/h with the sensors activated

Autel Evo 2 Pro: During flight the signal transmittion was lost first at 750m and during the second flight, at 1200m. The RTH was activated and I couldnt switch back to normal flight once the signal was gained again. The drone landed the two times and I couldnt do anything to cancel RTH. Appreciate any help in here.

Mavic 2 Zoom. The signal transmittion was lost once, for a few seconds but regained and no problems after that.

About the camera, Ill try to upload some photos and videos in 5.5K, 30FPS later. The colors are not as bright as in the mavic zoom but on the Autel Evo 2 Pro it look more real.

The autel explorer needs a lot of work in my humble opinion. I couldnt asign functions for the rear buttoms. Every time I start the drone, the pitch gimbal limit goes to default values as well as the image transmission mode.

Couldnt assign a switch for the leds, and the voice command get easly activated. Couldnt find how to configure that function.

The pictures that Ive got on my phone when I used the Live mode are useless. Need to figure out how to set up this function too.

Then I tried a short active track flight. Just a walk on a road with bushes on one side. Just to make it shorter, the dorne hit the bushes and crashed. Hopefully there were no damages on any of the components.

I know that it doesnt sound too positive my comments but is what it is. I paid almost 2k for the drone and I dont think is quite on pair with the mavic 2 zoom. Lets see what happens with the upcoming firmware updates.

About the camera I cant say too much yet, but I will put a few pics and videos in 5.5k-30FPS so you can make your own conclusions.

would be helpfully is you show the source of this information since the evo 2 pro is still in production.if it is not a secret.

 

[hidroela]

It's not his review. It's a copy and paste of someone elses.
It's a horrible review since the person reviewing it doesn't even know how to cancel RTH. He obviously didn't read the manual. And the part about it crashing in the bushes? He messed with OA for speed test. Did he turn it off and then hit the bushes?
I wouldn't trust that review at all.

do you have a link to it. thanks in advance.

 

[Tufargon]

do you have a link to it. thanks in advance.

easyheimer should be able to get that for you.

 

[easyheimer]

would be helpfully is you show the source of this information since the evo 2 pro is still in production.if it is not a secret.

Actually, the Evo 2 Pro is not still in production and people do already have it. Not sure where you are getting your information.

 

[easyheimer]

easyheimer should be able to get that for you.

Unfortunately they will not let me post links to Facebook in this forum.

 

[hidroela]

Actually, the Evo 2 Pro is not still in production and people do already have it. Not sure where you are getting your information.

don't know what that screen shoot means to you.
ho it came from Facebook good luck.
any way don't use that thing.

 

[easyheimer]

dont know what that screen shoot means to you.

It’s a screenshot of the post the member of the group posted. If you’re so curious search for the Facebook group or the name of the member who posted it and you’ll find the post along with pictures of his Evo 2 Pro.

Also, if you had your facts correct you’d know the Evo 2 Pro had been ready to ship for months, besides the “bug” they were dealing with.

 

[easyheimer]

https://m.facebook.com/groups/174251506514662?view=permalink&id=615482832391525&ref=m_notif&notif_t=group_comment_mention

 

[claudius62]

Oh, Yes Very good Link.

When you're done smoking the world, you'll wave ...

 

[hidroela]

https://m.facebook.com/groups/174251506514662?view=permalink&id=615482832391525&ref=m_notif&notif_t=group_comment_mention

sorry no Facebook on my side thanks for the effort.
any link to actual videos of people with the evo 2 pro on youtube

 

[easyheimer]

Oh, Yes Very good Link.
View attachment 6669
When you're done smoking the world, you'll wave ...

It shows up on my end smart guy. Not my fault you can’t figure out how to follow a link.

 

[easyheimer]

sorry no Facebook on my side thanks for the effort.
any link to actual videos of people with the evo 2 pro on youtube

You’re welcome. I’ll see if I can pull up a couple.