I heard the following procedure might work for an unplayable video file. Here is what I did. I was not flying, too windy. I set up the XSP like normal and to be sure I reformatted the SD card within XSP. After setup and connection:
1) I recorderd a 10 second video and turned off the recording button as one should.
2) I then started a second 10 second recording but did not stop the recording with the record button. I shut down the XSP and then the Remote Control.
3) Removed the SD card and dumped the files to the computer WITHOUT removing the files from the card itself.
4) First video played well. Second video, where I did not use the recording button, did NOT play.
5) Put the SD card back into XSP and started things up in the correct order... RC and then the drone.
6) Recorded a third 10 second video.
7) Shut down properly, that is stopped the recording, turned off drone battery and then the RC.
8) Redumped all three files to the computer.
9) ALL THREE PLAYED! Yes, including the 2nd one that would not play before.
No promises, but it worked this time!
1) I recorderd a 10 second video and turned off the recording button as one should.
2) I then started a second 10 second recording but did not stop the recording with the record button. I shut down the XSP and then the Remote Control.
3) Removed the SD card and dumped the files to the computer WITHOUT removing the files from the card itself.
4) First video played well. Second video, where I did not use the recording button, did NOT play.
5) Put the SD card back into XSP and started things up in the correct order... RC and then the drone.
6) Recorded a third 10 second video.
7) Shut down properly, that is stopped the recording, turned off drone battery and then the RC.
8) Redumped all three files to the computer.
9) ALL THREE PLAYED! Yes, including the 2nd one that would not play before.
No promises, but it worked this time!