Hello,
Recently acquired an Autel Evo2 Pro drone, and I'm having a weird issue when running a flight.
I plan a rectangular grid above a field but the drone seem to deviate from the flight plan. The deviation looks quite far off at the end of the flight (see picture - Blue is plan, grey is realised).
Have you witnessed such a behaviour and how did you correct it ?
I haven't done the photogrammetry yet, so I don't know how bad this impact images allignement.
Calibrations were made (did errors happened then ?)
Some elements of context :
Altitude : 10 and 20 meters
Overlap : 90% + 80% (GSD ~= 0.3cm)
Thanks for your answers.
Recently acquired an Autel Evo2 Pro drone, and I'm having a weird issue when running a flight.
I plan a rectangular grid above a field but the drone seem to deviate from the flight plan. The deviation looks quite far off at the end of the flight (see picture - Blue is plan, grey is realised).
Have you witnessed such a behaviour and how did you correct it ?
I haven't done the photogrammetry yet, so I don't know how bad this impact images allignement.
Calibrations were made (did errors happened then ?)
Some elements of context :
Altitude : 10 and 20 meters
Overlap : 90% + 80% (GSD ~= 0.3cm)
Thanks for your answers.
