Welcome, Autel Pilots!
Join our free Autel drone community today!
Join Us

Latest FW Update

Copepe

Active Member
Joined
Feb 22, 2019
Messages
34
Reaction score
15
Age
66
Since the latest update I have noticed 2 issues (I emailed Autel support this morning):

1) Panning has gotten jerky and there is no wind to blame it on.
2) RTH cancels if the aircraft "sees", even fleetingly, a bird or anything else that may remotely resemble an obstacle.

Has anyone else noticed this?
 
I have not. Ive personally never touched my RTH button... yet. At some point i'l try it I'm sure.

As far as panning goes, I assume you're talking about yaw, which I use a lot during filming. I haven't noticed any change. Maybe check your EXP settings to make sure the FW upgrade didnt reset them to default?
 
The RTH was triggered by a disconnect due to interference. I'll check the yaw settings, but the jerkiness only happens when rotating left.
 
The RTH was triggered by a disconnect due to interference. I'll check the yaw settings, but the jerkiness only happens when rotating left.
Hmm, that's strange. If you haven't already, check your prop blades for cracks, chips, or other damage. Idk what else would cause that.

Be patient, you'll likely get some good advice here.
 
Thank you. Props seem fine but will check them again tomorrow morning.
 
Thank you. Props seem fine but will check them again tomorrow morning.
Something I should have added was that it might not be a bad idea to reinstall the update. Also, make sure you have updated all of your batteries.

The method of reinstalling the FW update is something I don't know as I haven't had to do it. I know from updating batteries that if your drone already has the latest update it will be skipped in the update process, so I'm not sure how you have it go ahead and reinstall anyway. I'm pretty sure you can find threads on that very thing by searching this forum.

Idk if my advice is helping or not, but I know how frustrating this can be.
 
Again, thank you for your help. I did reinstall the update (manually) and made sure every battery has the latest and greatest. I will fly the Evo soon to ascertain that it is indeed working perfectly and will get back to you soonest.
 
Again, thank you for your help. I did reinstall the update (manually) and made sure every battery has the latest and greatest. I will fly the Evo soon to ascertain that it is indeed working perfectly and will get back to you soonest.
Best of luck my friend, and remember, Autel has fantastic support, it might be worth shooting over an email. They usually reply pretty quickly.
 

Latest threads

Members online

No members online now.

Forum statistics

Threads
11,786
Messages
106,123
Members
10,864
Latest member
Max Bavarian