I went and did my usual test flight and was demonstrating the dynamic track abilities to one of my family members. Well upon repositioning myself to a better vantage point the quad decided it was going to very gracefully nick a tiny bit of leaves off a tree branch that wanted to say high five! Well in all aspects I was puzzled because the EVO just said F-this, shut off its motors and fell a good 20 feet to it's hard landing on the tarmac literally 2 feet away from the cushy grass in which i was consistently flying about for if anything went wrong during the demonstration... well it completely broke off the entire housing the left rear motor on the control arm and when at first i didnt realize the wiring had just came off the motor on the bottom, i fixed the arm and it was balanced with everything was perfect.. until I went to start up the motors.. uts self checks out just fine, all LEDs and everything was perfectly fine! Except! The rear motor would not fire up... well I took the motor from its housing and upon actual further examination I see the black and red wires from the motor snapped its coiled wiring. Is there an easy way to fix this or am i forced to acquire a new motor entirely??