Hi everyone.
For AUTEL EVO Nano and Lite owners.
I noticed a strange behavior of these two models during the RTH.
I noticed that if during the RTH phase I move the sticks (left or right does not matter) the drone starts executing the command given, but when the sticks or the stick is released, the drone starts to slow down the RTH and above all try to restore your trajectory to the moment before touching the sticks.
Example. I am 200 meters away at a height of 50 meters and I start the RTH (the height of the RTH is set at 40 meters); the drone, as soon as I start RTH, begins to return back correctly: if I try to move the left lever (mode2) to lower the altitude, the drone begins to lower its altitude, always returning towards the starting point; this is correct: but the moment I release the left stick, the drone begins to slow down its run and rises in altitude to the height I had at the exact moment I started RTH (in the case of the example, a 50 meters).
This behavior, in my opinion, is not normal. The drone should maintain the new altitude that the pilot has set using the left stick (with autel EVO I and II, but also with the other drones, it works this way, i.e. it keeps the new height changed during RTH
I hope I was clear
For AUTEL EVO Nano and Lite owners.
I noticed a strange behavior of these two models during the RTH.
I noticed that if during the RTH phase I move the sticks (left or right does not matter) the drone starts executing the command given, but when the sticks or the stick is released, the drone starts to slow down the RTH and above all try to restore your trajectory to the moment before touching the sticks.
Example. I am 200 meters away at a height of 50 meters and I start the RTH (the height of the RTH is set at 40 meters); the drone, as soon as I start RTH, begins to return back correctly: if I try to move the left lever (mode2) to lower the altitude, the drone begins to lower its altitude, always returning towards the starting point; this is correct: but the moment I release the left stick, the drone begins to slow down its run and rises in altitude to the height I had at the exact moment I started RTH (in the case of the example, a 50 meters).
This behavior, in my opinion, is not normal. The drone should maintain the new altitude that the pilot has set using the left stick (with autel EVO I and II, but also with the other drones, it works this way, i.e. it keeps the new height changed during RTH
I hope I was clear