Evo II Aftermarket Multicharger

[Quad808]

If you were wondering if the battery charger for the Mavic Pro/Evo1 batteries works for the Evo II batteries...why yes it does. Charging now.
see this thread here on modding the charger for the Evo 1: Yes, it works. See pic and specs below.

DIY aftermarket chargers for the EVO

Disclaimer: Using anything aftermarket can void your warranty. You are the only one who can decide if this is right for you. Many people are using the Mavic Pro multi chargers to charge their EVO batteries. There are different brands out there but most do the same thing so shop around for the...

autelpilots.com

 

[Tufargon]

So you made a thread about another thread? lol

 

[Ansia]

On that link it talks about the Evo I. You say it also works for the Evo II. Do you have photos of that? If not, I will have to close this thread, since there isn't any proof and don't wish to mislead anyone.

 

[Quad808]

 

[Quad808]

Charging just fine. Look at the specs for the Evo II charger, almost exactly the same as Evo I. Max output for Evo II charger is 13.2v@5A. Output for above charger, [email protected] VS Evo 1 [email protected]
pinouts on the batteries are the same.

I made this post linked to the other thread, since it was done already and peeps can figure out what they need to get, or may have this charger already for the Evo I.

 

[Ansia]

Wont that .15v @.5A difference affect the battery?

 

[Quad808]

Wont that .15v @.5A difference affect the battery?

The Mavic charger is actually outputting less amps than the Evo II battery charger. No harm. Single battery charging would take longer on the Mavic charger vs the Evo II charger, in theory. Just hooked it up today. Smart batteries will regulate the amount of amps going to the battery anyway.

 

[Tufargon]

My apologies!!

 

[Quad808]

 

[skipper1]

Quad808, I just wanted to let you know how much I appreciate your battery mod. I just finished modding my new Powerextra for Mavic. It was easy peasy. Thank you!

 

[Quad808]

Always glad to help out fellow drone peeps!

 

[Txfirecop]

Thanks Quad808 for the info. I actually ordered that charger last night. I do wish I would have seen this before I ordered the charging hub though.

 

[Len]

And if you want to spend $10 more on this charger (LED voltage display and removable cables), I can confirm it also works! Amazon.com: Energen DroneMax MP18A Drone Battery Charger, DJI Mavic Pro Accessories, Intelligent Fast Multi Battery Charging Hub Station (Charge 3 Batteries & 2 USB Ports Simultaneously): Industrial & Scientific
Thanks again Quad808 for showing how to mod the plugs!

 

[lukappaseidue]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[dronographer]

So let me get this straight...the pin interface from a generation 1 Mavic Pro is the same as the EVO ll ?

 

[Quad808]

Yep, same pin outs. Oh wait. I misread your question. First pic is from the Mavic Platinum charger, then pictures for the Evo I and Evo II charger.