Car hopping.
- Thread starter Old Bama Dude
- Start date
And here's the proof. Shoot, I think it even hovers better now.
sensor lift and hover.wmv
sensor lift and hover.wmv
Quick question. Are these sensors you installed or come standard with the drone that are just now getting activated with firmware updates.
That's the Starpoint positioning module, pictured below and for whatever reason it apparently never really did anything, which has always puzzled me. But anyway, with the FW update it now works and makes a big difference.
Thanks for the quick replies. I installed one of the beta updates yesterday. Will check what version it is when I get home.
Reviving an old discussion.
The first thing I noticed when I started flying that I did not like was the fact the Drone kept track of altitude rather than elevation. Hope I said that right..... Launch the drone to 50ft and then fly over land that's uphill from you and the drone will fly into the ground.
Are you guys saying that now the drone is "smart" enough to maintain it's 50ft height from the ground as it flies up the hillside??? If so, that's very useful for me!!!!!
I video a lot of moving AG equipment working in fields with varying terrain height. I learned early on to launch on high ground. I often am moving 10-15 mph 20ft off the ground. Easy to be concentrating on the camera view and lose track of the ground change.
I'll try to play with this in my fresh cut hayfield that's on a rolling hillside.
The first thing I noticed when I started flying that I did not like was the fact the Drone kept track of altitude rather than elevation. Hope I said that right..... Launch the drone to 50ft and then fly over land that's uphill from you and the drone will fly into the ground.
Are you guys saying that now the drone is "smart" enough to maintain it's 50ft height from the ground as it flies up the hillside??? If so, that's very useful for me!!!!!
I video a lot of moving AG equipment working in fields with varying terrain height. I learned early on to launch on high ground. I often am moving 10-15 mph 20ft off the ground. Easy to be concentrating on the camera view and lose track of the ground change.
I'll try to play with this in my fresh cut hayfield that's on a rolling hillside.
Jagerbomb52
Well-Known Member
No this is not the case, the starpoint system is only good to I think 9 feet. After that it is GPS and will not adjust the height.
Jagerbomb52
Well-Known Member
Just reread the manual and it is 300 CM or 9.8 feet.
The StarpointTM Positioning System is activated by default when the aircraft is turned on.
•The StarpointTM Positioning System works both in GPS and ATTI modes and is only valid when the aircraft is between 30cm and 300cm above the surface.
IMPORTANT
The performance of the StarpointTM Positioning System is affected by the brightness and texture of the surface over which the aircraft is flying. The ultrasonic sensors may not function accurately above sound-absorbing materials. Please try to avoid the following situations:
•Flying over a monochrome surface (e.g. pure black, white, or red) or a highly reflective surface (e.g. water, transparent surfaces).
•Flying over extremely dark or bright surfaces, or in an area where the lighting changes frequently.
•Flying over surfaces with unclear patterns or texture, or highly repeating patterns or texture (e.g. tiles with the same design).
•Flying over surfaces (e.g. thick carpet) that can absorb or deflect sound waves.
•Flying at a high speed: over 8m/s at a 2-meter height, or over 4m/s at a 1-meter height.
•Flying over moving surfaces or objects.
The StarpointTM Positioning System is activated by default when the aircraft is turned on.
•The StarpointTM Positioning System works both in GPS and ATTI modes and is only valid when the aircraft is between 30cm and 300cm above the surface.
IMPORTANT
The performance of the StarpointTM Positioning System is affected by the brightness and texture of the surface over which the aircraft is flying. The ultrasonic sensors may not function accurately above sound-absorbing materials. Please try to avoid the following situations:
•Flying over a monochrome surface (e.g. pure black, white, or red) or a highly reflective surface (e.g. water, transparent surfaces).
•Flying over extremely dark or bright surfaces, or in an area where the lighting changes frequently.
•Flying over surfaces with unclear patterns or texture, or highly repeating patterns or texture (e.g. tiles with the same design).
•Flying over surfaces (e.g. thick carpet) that can absorb or deflect sound waves.
•Flying at a high speed: over 8m/s at a 2-meter height, or over 4m/s at a 1-meter height.
•Flying over moving surfaces or objects.
Thanks guys!!!
Dang it....... Wish it was twice that height.
I'd be afraid that at 15mph for example it might not react fast enough to avoid ground contact on anything more than the most gentle slope??
Dang it....... Wish it was twice that height.
I'd be afraid that at 15mph for example it might not react fast enough to avoid ground contact on anything more than the most gentle slope??
Similar threads
Latest threads
-
-
-
-
-
Autel 640t Enterprise Lite „OA (Obstacle avoidance) abnormal“ drone became not responsive.
- Started by LexusWorld
- Replies: 0
Members online
No members online now.