after new firmware , the drone become much unacceptable
- Thread starter Chrisxiao
- Start date
I have this problem wih the nano+ with the last update
1. Auto take off doesn't work, nano+ turns on motors but won't take off
2. Manual takeoff, I turn on the motors manually and when I give the lift lever it doesn't take off, today I realized that you have to leave the lever up for more than two seconds for it to take off.
3. The right lever for lateral and forward movements does not work when the front or front sensors of the Nano+ have a lot of light or are facing the direction of the sun, setting the sun behind the Nano+ works without problem, the same at night.
4. The autofocus is not working, I have videos that are really worthless
5. The crooked horizon
1. Auto take off doesn't work, nano+ turns on motors but won't take off
2. Manual takeoff, I turn on the motors manually and when I give the lift lever it doesn't take off, today I realized that you have to leave the lever up for more than two seconds for it to take off.
3. The right lever for lateral and forward movements does not work when the front or front sensors of the Nano+ have a lot of light or are facing the direction of the sun, setting the sun behind the Nano+ works without problem, the same at night.
4. The autofocus is not working, I have videos that are really worthless
5. The crooked horizon
GeoDrone SRL
Well-Known Member
- Joined
- Aug 18, 2021
- Messages
- 472
- Reaction score
- 273
- Age
- 47
Chrisxiao
If you are here to READ also the posts, MAYBE you will have the answer...If you make 3 posts in Forum, you will get at a point a BAN.
I quote for this pink/ yellow issue:
Please follow these instructions…
"create a new txt file and name it: tu_xiang_yi_jian_qu_wu.txt
Copy it to the sd card, power on the aircraft and wait about 1 min.
Reboot and camera issue will be fixed."
Similar threads
