What is the difference on waypoint screens

[Peter Goldwing]

There are two waypoints screens.
One you can access from MISSION screen .
In this one you can preplan a flight with no connection to the controller or drone.

The other one is from CAMERA screen. This one you have to have the drone connected and perhaps even hovering.
Because of that I have not learned anything about it.
What is the difference?

 

[Heckmaniac`s Drone]

I can plan in both areas off-line and save to fly at a later time. Going through the "Mission" screen I found it doesn't limit the distance of the mission, but the lowest altitude you can fly I think is 98ft. Going through the "Camera" path your distance is limited to 16,355 ft total - and your minimum altitude can go to 33 ft. Those are the two main differences I've noticed so far.

 

[Dranos EVO 2]

Can you fly the evo 2 and set up waypoint mission while in the air? This way I can see what's at each waypoint. Next if so can, can you name and save it?

 

[claudius62]

On the Evo 1 and Explorer 1.0.1.45, we can do this. I think the Evo 2 must be able to do this, by "intelligent flight" type in "Waypoint", put the Evo in the air
Type Set A to mark your starting point.
Fly, Tap button A to mark a waypoint or button B to erase it.
Make your way by scoring the points with the A button.
When finished, mark the last point.
And at the end, you can record the course (on the Evo 1) and replay it.
Now, I can't confirm it to you, see the instructions.
Autel wouldn't sell me the Evo 2, told me it wasn't ready yet and sent me a Mavic 2 Pro as consolation.

 

[claudius62]

Here is the explanation (instructions for the Evo 1), I think you also have it for the Evo 2.
Access it by: Camera -> connected -> mission