Problem transmission image remote control autel Evo pro 2 v3 enterprise

[Cronos]

Hello, thank you for accepting me. I decided to buy an Evo 2 Pro V3 Enterprise after having owned an Evo Nano+ without any problems. It turns out that after updating everything, drone, controller, batteries and so on, I've made several flights at different points and noticed some major image jumps on the controller screen. Still fresh off and there is a lot of latency in the signal from the drone to the controller, I hope to receive some ideas or solutions, thanks.

 

[ilama]

Itenta vincularlo de nuevo al mando ,

 

[DroneRat]

Is the area you are flying in free of interference? Might try a test flight out in the country to see if the image transmission improves.

 

[boatdoc]

had a similar issue with evo lite and nano plus using sky app. deleted app and reinstalled -seems to fix the issues

 

[Robert5doy]

Hello, thank you for accepting me. I decided to buy an Evo 2 Pro V3 Enterprise after having owned an Evo Nano+ without any problems. It turns out that after updating everything, drone, controller, batteries and so on, I've made several flights at different points and noticed some major image jumps on the controller screen. Still fresh off and there is a lot of latency in the signal from the drone to the controller, I hope to receive some ideas or solutions, thanks.

had a similar issue with evo lite and nano plus using sky app. deleted app and reinstalled -seems to fix the issues

I have the same issue the image transmisión jumps and skips when the drone is moving forward, how can I fix this

 

[waynesportraits51]

I have the same problem. When I first got it the video was perfect now it sucks . Also I got an update for my firmware. It is V1.3.4 update and it won't update, but
I could never update over the air (OTA) on the aircraft firmware I always had to do it with a SD card. My problem is
i cannot find that firmware any ware. It is happening with my enterprise V3 and also with my evo 2 v3 . has anybody have had the same problem?

 

[Theone]

I have the same problem. When I first got it the video was perfect now it sucks . Also I got an update for my firmware. It is V1.3.4 update and it won't update, but
I could never update over the air (OTA) on the aircraft firmware I always had to do it with a SD card. My problem is
i cannot find that firmware any ware. It is happening with my enterprise V3 and also with my evo 2 v3 . has anybody have had the same problem?

After download the firmware before install turn your WiFi off on the controller and if upload stuck around 20% or 27% and failed. Just restart controller and try again.