My name is Pete, own both XSP and Wifi models. Just retrieved the wifi version from shoreline of marsh where it had been for last 5 days in the elements, after it took off on me. Fortunately I had the XSP to locate it!
Greetings from Sunset Beach N.C.
- Thread starter PeteJ
- Start date
LuvMyTJ
Admin
Hello,
It is a pleasure to welcome you to the AutelXPilots forum.
I hope that you will be able to use the forum to further your safety knowledge and for the exchange of innovative ideas and as a resource for
current developments in Autel quadcopter’s. Read the manual a few times and watch lots of Youtube videos on the subject to give yourself a good start.
Sorry to hear of your crash. Did you contact Autel about it? Autel is said to have excellent customer service.
It is a pleasure to welcome you to the AutelXPilots forum.
I hope that you will be able to use the forum to further your safety knowledge and for the exchange of innovative ideas and as a resource for
current developments in Autel quadcopter’s. Read the manual a few times and watch lots of Youtube videos on the subject to give yourself a good start.
Sorry to hear of your crash. Did you contact Autel about it? Autel is said to have excellent customer service.
Hello TJ,
Yes, I started a ticket just after I purchased. There were a couple of issues. Tech support (which was good!) addressed an issue I had with the camera which had issues resetting. The problem remained with an issue I had with hovering. The aircraft would move 5 to 10 ft back and forth (not from prop wash!). It would also start circling slowly after lift off all the time and then progress to movement. Controls, compass were calibrated before flights. I flew in areas without power lines or possible interference. During this last episode I lost complete control of the aircraft while inspecting a friends roof. I was able to put the camera back together, replace broken prop and miraculously it still flies and shoots video. The aircraft took off so quick and forcefully the only reason it wasn't smashed beyond recognition was because it landed in thick tall marsh grass in an alligator nesting area on the bank of pond. I will post a link to the video of incident when I get home tomorrow.
-Pete
Yes, I started a ticket just after I purchased. There were a couple of issues. Tech support (which was good!) addressed an issue I had with the camera which had issues resetting. The problem remained with an issue I had with hovering. The aircraft would move 5 to 10 ft back and forth (not from prop wash!). It would also start circling slowly after lift off all the time and then progress to movement. Controls, compass were calibrated before flights. I flew in areas without power lines or possible interference. During this last episode I lost complete control of the aircraft while inspecting a friends roof. I was able to put the camera back together, replace broken prop and miraculously it still flies and shoots video. The aircraft took off so quick and forcefully the only reason it wasn't smashed beyond recognition was because it landed in thick tall marsh grass in an alligator nesting area on the bank of pond. I will post a link to the video of incident when I get home tomorrow.
-Pete
<iframe src="x-star wifi fail from Pete J on Vimeo" width="640" height="360" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>
<p><a href=" ">x-star wifi fail</a> from <a href="Pete J">Pete J</a> on <a href="Vimeo: Watch, upload, and share HD and 4K videos with no ads">Vimeo</a>.</p>
<p><a href=" ">x-star wifi fail</a> from <a href="Pete J">Pete J</a> on <a href="Vimeo: Watch, upload, and share HD and 4K videos with no ads">Vimeo</a>.</p>
Latest threads
-
-
-
-
Upgraded last night to latest software, now all 3 accessories have issues..
- Started by ghost183
- Replies: 1
-
Does anyone have Firmware V1.9.10 For Nano Plus to be able to update manually
- Started by Aureliohdez
- Replies: 0