First Autel Drone; Configuration Questions

[rdkautel]

Hi!

I just bought an EVO Lite 640t thermal/visual drone! Its an XL715.

I'm used to flying DJIs, Skydios, etc.

In the controller menu under photos, I'm unable to change the image dimensions nor photo format. Is there some secret to doing this?

Is it possible to change video from 4:3 to say 16:9?

Looks like many settings are hardcoded.

Is it possible to turn off remote ID?

Thanks,

Bobby

 

[DroneRat]

Hi!

I just bought an EVO Lite 640t thermal/visual drone! Its an XL715.

I'm used to flying DJIs, Skydios, etc.

In the controller menu under photos, I'm unable to change the image dimensions nor photo format. Is there some secret to doing this?

Is it possible to change video from 4:3 to say 16:9?

Looks like many settings are hardcoded.

Is it possible to turn off remote ID?

Thanks,

Bobby

Use the up-arrow at the bottom right of the screen to expand the available options, check/verify that AUTO is not selected for important settings you might want to change. AUTO also will fix any other dependent settings related to that parameter. RID cannot be turned off. 4:3 to 16:9, no.

 

[rcee]

Use the up-arrow at the bottom right of the screen to expand the available options, check/verify that AUTO is not selected for important settings you might want to change. AUTO also will fix any other dependent settings related to that parameter. RID cannot be turned off. 4:3 to 16:9, no.

If you have no clue what you are talking about i suggest
hold your comments.
There is no ''up-arrow'' in the enterprise app.

 

[rdkautel]

Hi!
More test flights today. Noticed another quirk.
I'm testing the accuracy of the GPS and noticed that about half of my pictures don't have the Xmp OTHER data like pitch, yaw, tiff:Make, etc.
Wondering if there was some setting I fat fingered, or was it related to altitude of the aircraft or zoom, or some other setting that disables the setting of XMP metadata.
Thanks,
Bobby

 

[DroneRat]

Looks like you are running the Explorer ENTERPRISE version, sorry my instructions were for the Explorer v3 version.