Firmware Download
- Thread starter mondambalam
- Start date
Do you have that Downloaded version of the file that you can share with me
sorry, i thought the files were attached. They deleted them. They are on this link:
1drv.ms
Microsoft OneDrive
1drv.ms
Thanks a ton for the sharing. It helped. Sincerely appreciate your supportsorry, i thought the files were attached. They deleted them. They are on this link:
Microsoft OneDrive
I've archived a number of firmware versions as well if you want to look for something additional. Does anyone have a stable version that they recommend? I'm looking to settle on a version after having issues with my drone having bottom-view calibration error and tech support going through their same routine as usual.
This is not a firmware related issue, your bottom sensors need replacement. Send it to Autel.
this is not correct brother..
my drone is at autel WA as we speak, went to germany first, but they are useless...
the november update failed OTA several times during transfer to aircraft,, it went haywire effecting almost all systems.. accessories were erratic, lost the spot light entirely and recovered after the 4th SD firmware to aircraft, OA red in all directions at 8.5 meters locking the drone in hover till critical battery, forced landing, Drifting 1 meter - 14 seconds, rocket direction changes from hover with out stick input, pulsing speed control at MAX input any direction, didnt want to land, didnt recognize it landed and wanted to ascend to RTH altitude after it landed, controller shows the 6.4 not the 7.9, intermittent video loss, comms loss, RTH initiated with full batteries 100 feet from me, cameras freezing, prolonged thermal refreshing every 2 seconds that lasted 1 second... any other issues but you get the idea...
disaster.. but it happens..
lets see what they find out..
on another note, the last update, november 2024, you can not down grade to previous versions as per autel, hence why mine went back.. my drone was perfect until november
Last edited:
The downward sensor calibration ''error'' is caused by corrosion in the downward sensor
This is a known issue for the E2Pv3 and has nothing to do with firmware and unrelated to firmware versions that are bricked by users because of not following the update instructions. It fails for a reason. All my updates on the E2Pv3 went flawless. And yes, i encountered the 'downward vision sensor calibration error'' too. Created a ticket, needed to ship to germany repair center. Returned within a week. Issue solved.
Last edited:
really man?
did you not read the post? or got stuck and just want to get your point across?..
did you even consider that your case is your case and not everyone's is the same? your post suggests you know better, but in this case, you do not.. so dont insist..
i havent flown any of my DJI equip since i bought Autel, but tech is tech, never 100%..
but 2 drones on this forum failing after the update and you chalk it up to corrosion because that's what happened to you? or that's what you were told? come one man..
there are countless posts across too many forums about the issues with the 11/2024 update..
but it is what it is.. stay safe
I've had the bottom view calibration error for over a year. At the time, Autel told me once I sent it back, it would be over 30 days before they could look at it. I never sent it back, couldn't be out of service that long. I just fly it with the frigging annoying error message and deal with it.
Similar threads
Latest threads
-
-
-
-
-
From the Netherlands, new to the forum and new to Autel
- Started by mikear
- Replies: 10