Batteries and Lite + Multi Charger

Fire377 · Feb 23, 2022

Every time I charge batteries with Lite + Multi charger I struggle to fit all three on, anyone have any methods that they find easy and are willing to share.

gophcc · Feb 23, 2022

1. Place the hub with the cord at left, insert the first battery at left socket, 2nd at enter, 3rd at right.
2. Place the center part of battery on the "groove" of the hub then it will be very easy to slide in horizontally .
3. As the room in between batteries is small, don't hold the battery at sides. Put your indexes at end of battery and thumbs at edge of hub, a slight squeeze will do the job.
4. Shake slightly to confirm the connection, don't pull up or it will disconnect again.

Fire377 · Feb 24, 2022

gophcc said:
1. Place the hub with the cord at left, insert the first battery at left socket, 2nd at enter, 3rd at right.
2. Place the center part of battery on the "groove" of the hub then it will be very easy to slide in horizontally .
3. As the room in between batteries is small, don't hold the battery at sides. Put your indexes at end of battery and thumbs at edge of hub, a slight squeeze will do the job.
4. Shake slightly to confirm the connection, don't pull up or it will disconnect again.

Its a matter of getting used to it, your suggestion is fine and works

bkushner · Feb 24, 2022

Fire377 said:
Every time I charge batteries with Lite + Multi charger I struggle to fit all three on, anyone have any methods that they find easy and are willing to share.

Worst hub ever!

DARKSeifer · Feb 25, 2022

If you use it vertically, you can fit the batteries easier. You need to press the lateral battery buttons to insert it. Note that you don't needed to press the buttons for the extraction from the hub (it's only necessary for the extraction from the drone).