Bad USB port on the remote

[mixchief]

I saw a couple of posts referring to the USB port but none talking about it failing. My micro USB port is not connecting at all, the Explorer app just shows disconnected and with dark gray screen and no camera controls at all, of course. If I use the USB-A port it works, however today I had a temporary setback when neither of the USB ports worked, neither on my Android NVIDIA Shield tablet, nor my iPad Air 2. I had to test them with my DJI Inspire to make sure it wasn't a tablet issue, but I couldn't test the micro USB cable to see if there I have the issue. To make matters more frustrating, or comfirm there is an issue with the micro USB port, the R?C is taking forever to charge, from a 38% charge to 49% it has taken 3 hours. I'm afraid I can't find a USB-A to USB-A to try that port for charging.
Has anyone experienced problems with the USB ports? And just for those DJI peepers that might say "see Autel sucks" the USB-A port on the Inspire remote is notorious for going bad and it's not ven use for anythingg other than interface for the control devise.

 

[Atomic08]

I had a slight connection problem sometimes and found out that I had to restart my tablet and everything to get a connection.
My controller showed it was ready to fly, but no screen camera view,
I think I had this problem if I start the tablet and then the controller before the tablet completely boots up
Samsung Galaxy Tab A

 

[mixchief]

I actually always start tablet first then a/c then the tablet, force of habit I got with the DJI. My issue is regardless of order though, and like I said the USB-A works, which is good as I'm going on a trip in a month and need EVO as I don't want to lug the Inspire