Upper View Calibration Error - Autel Evo II V3

[ATLScam]

UPPER VIEW CALLIBRATION ERROR

I've error message Upper View Calibration Error, I already checked compass & IMU sensor status normal and drone ready to fly,
Anyone have same problem or have solution for this issue ?



Thanks..

 

[CypressAg1983]

UPPER VIEW CALLIBRATION ERROR

I've error message Upper View Calibration Error, I already checked compass & IMU sensor status normal and drone ready to fly,
Anyone have same problem or have solution for this issue ?

View attachment 17560

Thanks..

Same problem - repetitively - except my EVOII Pro issue is with the RIGHT VIEW sensor. No known reason, and always the same sensor. The only solution I've found - and a poor one at that - is to connect the drone to my PC and run it through the sensor calibration process; which involves orienting the connected drone's right sensor in front of my PC's monitor and follow the prompts to "paint" the circles displayed on the Monitor. Very frustrating!!! DJI's MAVIC PRO IV is beginning to look very tempting.

How To Calibrate EVO II Drone Obstacle Avoidance Sensors?

Video: How to calibrate the obstacle avoidance sensors When prompted by Autel Explorer app, we recommend that you perform an obstacle avoidance (OA) visual sensor calibration. Before the calibration Remove the propellers before the calibration Power on the aircraft Use a USB-C cable to connect...

www.autelpilot.com

 

[rcee]

Anyone have same problem or have solution for this issue ?

You need to contact Autel Robotics. Your sensor is faulty. Forget the calibration mentioned, it's only for E2P v1. V3 Variants have self calibrating sensors.