Suddenly my evo2 can't control myself.

[Byeongnam kim]

Why my evo2 suddenly can't control?

Just change new propeller but when take off after hovering very well.
So reason new propeller?

 

[Byeongnam kim]

 

[phantomrain.org]

I do not think those new props have any bearing on what is happening there. Have you considered loss of GPS or Satelites. ?

 

[Byeongnam kim]

I do not think those new props have any bearing on what is happening there. Have you considered loss of GPS or Satelites. ?

GPS 17 and IMU ok all everything well but only changed new propeller.

 

[phantomrain.org]

GPS 17 and IMU ok all everything well but only changed new propeller.

it just seem very erratic for a change in propellers, My cats chews the tips off of mine and it still flys better than what I am seeing here.

Phantomrain.org
Gear to fly your EVO 2 in the rain

 

[Byeongnam kim]

it just seem very erratic for a change in propellers, My cats chews the tips off of mine and it still flys better than what I am seeing here.

Phantomrain.org
Gear to fly you EVO 2 in the rain

Thanks your good comment and wanna test again.

 

[Wilkz]

I do not think those new props have any bearing on what is happening there. Have you considered loss of GPS or Satelites. ?

This also happened to me last week when I just "TOOK OFF" and i had to fight with it and just managed to safely land the aircraft thankfully

The reason i think mines did this was getting Magnetic interference from 3 Steel fences on 3 sides of drones take off Position i presume as have flown it since and seems fine, so No More taking off Near Steel as was VERY SCARY!! LOL

 

[Byeongnam kim]

Omg becareful

 

[Wilkz]

?Learn by your Mistakes.

 

[Byeongnam kim]

Yes ?

 

[PX1P]

Even the metal guardrail of a bridge or side of the road will cause interference. I tried taking off from a sidewalk on a bridge once. No go.

 

[Byeongnam kim]

Yes you are right but when checked all around no more any metal guardrail place is all the around sea beach.

 

[Hawaii Drone Imaging]

Try and check out this video. He was having an issue with new props. Not sure if its similar to your problem, but never hurts to check.

 

[Byeongnam kim]

I already checked with new propeller to other place but no more any issue.

 

[Rubik3x]

I already checked with new propeller to other place but no more any issue.

So, you think the problem was your location, too much steel around?

 

[Byeongnam kim]

I meant no more any steel there just around see beach so I think drone something was wrong unknown issue.