Welcome, Autel Pilots!
Join our free Autel drone community today!
Join Us

DIY EVO Hard Case

actruck

Member
Joined
Dec 26, 2016
Messages
7
Reaction score
9
Age
64
Location
Waynesboro, Pa
This is the first time I've worked with the coroplast dividers so go easy. I was able to fit everything in the case except my tablet adapter. I looked at the Trekpak product but that stuff is too expensive. I chose the coroplast and armaflex insulation instead. I see a few things I would change but I'm happy with the end result.

As far as all the stickers on the inside of the lid...I was going to toss them but figured I'd hide them for a little while in case I needed information off of them.
 

Attachments

  • 20190228_195338.jpg
    20190228_195338.jpg
    4.3 MB · Views: 34
  • 20190228_195431.jpg
    20190228_195431.jpg
    4 MB · Views: 33
  • 20190228_195445.jpg
    20190228_195445.jpg
    3.5 MB · Views: 27
  • 20190228_195508.jpg
    20190228_195508.jpg
    4 MB · Views: 31
  • 20190228_195529.jpg
    20190228_195529.jpg
    4.5 MB · Views: 29
  • 20190228_195618.jpg
    20190228_195618.jpg
    1.5 MB · Views: 26
I know this isn't a DJI board but I'm sure some of you have both as I do. I decided I wanted the same case for my Mavic Pro. Both cases turned out nice and now I have the ability to rearrange as needed. Cost was also a factor.
 

Attachments

  • 20190302_182832.jpg
    20190302_182832.jpg
    4.1 MB · Views: 3
  • 20190302_182838.jpg
    20190302_182838.jpg
    4.2 MB · Views: 3
  • 20190302_182856.jpg
    20190302_182856.jpg
    4.3 MB · Views: 3
  • 20190302_182956.jpg
    20190302_182956.jpg
    3.8 MB · Views: 3
  • Like
Reactions: Pork Belly

Latest threads

Members online

No members online now.

Forum statistics

Threads
11,229
Messages
102,660
Members
9,819
Latest member
sky3d