Recent content by Persuader

That's not what I was talking about. When you give the order to land even by using the land/take off button of the remote or keeping the left stick down, the drone starts to descend and once in the ground, it stops automatically the motors. But the problem here is that once on the ground, the...

I'm facing the same issue with my Evo 2 Pro. Any solution found for it? No accesories attached to the drone and all the bottom sensor clean and perfect.

In Spain Aeroscope is widely used in combination with other systems by the police. They have fixed systems in the main cities (Madrid, Barcelona, etc) and portable units distributed all around the country and in some cases they are mounted in cars so they are patrolling while scanning. There are...

You can find here all the information for downgrading. https://autelpilots.com/threads/problem-with-firmware-v2-7-45.11059/

Not all units are affected, it's quite strange.

First downgraded to 2.7.35. And after that, I updated to 2.7.37. Because it is not possible to downgrade directly to 2.7.37 (2.7.37 it's only a patch to apply over 2.7.35, which is a main firmware version).

Downgrading firmware solved the issue.

Here you have all firmwares and the force_upgrade file. https://github.com/ping-spike/AutelEvo2Firmware Do the downgrade with no mobile phone connected to the remote.

There is no problem rolling back, just load the firmware you want in the external SD card along with the force_upgrade file.

If you downgrade the firmware you will solve the problem. You have to downgrade to the previous version for your drone version. If it's a V1 drone, the previous is 2.7.35, because if you try to downgrade to 2.7.37 it will not work, because 2.7.37 firmware is only a small patch to apply over...

Downgrading to 2.7.35 fixed the issue.

Hello, After getting my Autel Evo II Pro V1 useless because of the gimbal shaking crazily with the last official update 2.7.45 I would like to inform everyone about the problem and the possible reason, just in case someone can contact Autel more directly than me (I have sent emails to Autel...

According Autel webpage gimbal version por V1 standard remote is V0.1.64.0. This is the same version for V2 drone with standard and smart remote. But for the Smart remote for V1 the version number is V0.1.55.0. Maybe there is some kind of mistake in the gimbal version deployed with the firmware...

I wonder why the gimbal version is different for the standard RC and for the Smart Remote. Maybe this is the problem of the update messing with the gimbal, because all the components of the firmware 2.7.45 are the same version number for the drone in both RC models, except the gimbal. The ones...

Here is a video of my problem after the update. https://mega.nz/file/5IpTGbjT#izY2rjQgDPmX9FcdE6tcDrMjwZOdh5D-BncMQ2vNYoE