Recent content by Mark11

I contacted Autel customer support, they shipped me a file which I used to update the aircraft which had fallen victim to a faulty firmware update - or something. Once the aircraft was updated, all the software versions aligned with the latest Autel table.

Problem Solved!. After a bit of poking around to find the source of the warbling tone, I found that the pan motor in the gimbal was subtly oscillating and marking the noise. I looked through the Autel software versions table at the various firmware my aircaft should have and found that the...

The warbling tone is produced by the pan axis gimbal motor - which also gets quite warm while making with warbling sound. There is some sort of mild instability in the pan axis which is produced by the motor over correcting for some issue _ i dont’ know if the problem is hardware ( gimbal ) or...

I have Evo2 V3 RTK with 7.9” SC. I updated Android, Contoller software and Aircraft firmware to latest versions. When I check the about tab for software versions. Image transmission on both SC and aircraft is 1.1.1.32 . THe Autel official version table lists image transmission version as...

This issue with video stopping and starting at each waypoint is completely stupid and no doubt easily fixed by a couple of lines of code. The other silly thing is that the airecraft should be able to fly a waypoint mission with the operator haveing control of the camera pitch, aircraft yaw and...

I have a V3 RTK with the latest updates to android, system and firmware. The start up tone is normal, then a few seconds after start up the aircraft makes a intermittent kind of warbling tone and I’m not sure why. There are no warnings on the controller and the aircraft flies normally in all...

Yes its the re bar in concrete which is maybe 4” below the surface. This is a frequent problem where I fly - Lots of concrete surfaces, Bridges, walkways, roof tops of parking structures, etc. I can sometimes hold the aircraft in my hands off the surface, chest level and get a compass...

You could drop Yaw to 20% . I generally fly at 30% . Yaw is not a set and forget kind of thing. A few days ago I was flying a very long duration arc around a 60 story building starting from 700M out. Yaw could have been 15% for that shot instead of my normal 30%

I updated yesterday and did a short test flight today and my aircraft - V3 RTK seems good so far. I need to take it for a longer spin for a more complete check out. No complaints .

Yaw movement at 30% is a real variable depending on how fast you fly and how close to the subject you are . At some speeds and longer distances 30% is too much and close in its too slow.

I have a E2V3 RTK with smart controller and the aircraft controller combo will display ADSB info on the screen from approaching aircraft. Nice, but insufficient. What would be helpful is if the ADSAB tag with a nearby aircraft would display altitude information if it is under 400'AGL, so In...

This is a V 3 Controller

Controller is for the V3 ...

Selling a spare 7.9" Autel smart controller. Controller is in vg condition - there are some cosmetic scratches on the underside of the of the controller otherwise the device is clean. The Controller has the latest updates from Autel and works as expected. controller was bought new 7/23. I am...

I am finding that there are not many used EVO2 V3's for sale. Kind of odd that people complain about them, which I would think would mean more on the used market, but I have found one or two so far.