Welcome, Autel Pilots!
Join our free Autel drone community today!
Join Us

Recent content by Jbrennan

  1. Jbrennan

    Major Multiple Issues with Evo II V2 Enterprise and Autel Explorer

    On point 1, I believe that if you manually start the camera it will continue to film through the waypoints until you stop the camera. Set the camera to no action when setting up the mission. On point 2 The SanDisk Extreme Pro has very fast read/write; Autel recommends using that. (are you...
  2. Jbrennan

    Gimbal Roll issues

    Hi- I had a similar problem with my V1 evo 2 pro. Calibrating the gimbal didn't work for me, either, so I contacted Autel and sent them some screen recordings of the horizon tilt. After trying a couple of fixes, I went ahead and sent it in. They did a factory gimbal calibration, and it fixed...
  3. Jbrennan

    Fitting Smart Controller to Rugged Case

    Here are a couple of pictures showing the slot location and the joysticks stored in the holes for the live deck antennas. The slot is 8" long, and the bit is an 1/4" upcut router bit; I cut it in 2 passes, the final depth being a little over an inch.
  4. Jbrennan

    Fitting Smart Controller to Rugged Case

    I ended up leaving the handle on the back, and adding a layer of foam in the bottom tray; I took some measurements with the controller set to the right side of the tray, and drew out a slot for the handle on some painters tape attached to the bottom of the top tray. I cut the perimeter with an...
  5. Jbrennan

    Any EVO 6k deliveries in the USA

    I got an Email from Wellbots yesterday, saying that it had shipped. There was a UPS tracking link in the Email; right now it's in Tacoma Wa, and it's scheduled for delivery on the 27th. I'm on the east coast, so a week is about right.
  6. Jbrennan

    Wellbots shipping end of week but a bit confusing....

    I got the same Email this morning; I Emailed David at Wellbots and he said that he didn't have access to the shipping list, but that the 2nd batch would be in 2 weeks. Maybe they mean that they will start shipping this week, and all of the preorders would be shipped by next week. Who knows...
  7. Jbrennan

    Lake Fairfax Reston Va.

    Took these pics on Easter Sunday; auto camera settings
  8. Jbrennan

    Low res stills preview on mobile

    What Elroy said... missed that
  9. Jbrennan

    Low res stills preview on mobile

    The low res pictures are thumbnail shots from the flight log; they just show you where in the flight each shot was taken from.
  10. Jbrennan

    Button assignment Evo RC

    While I had the vhb tape out, I also reattached the pads on the phone holder; the tape that was used failed when it got hot.
  11. Jbrennan

    Button assignment Evo RC

    I kept hitting the buttons too, so I came up with an easy fix- I made these out of 1/8" black pvc, and attached them with vhb tape. It works great, and I can hit the buttons easily when I need to.
  12. Jbrennan

    How do you do your compass calibration?

    I've never had luck with the nose down, but nose up sometimes takes a few tries, but it always seems to work. Autel support told me to do whatever works; I think the vertical orientation is the most important thing.