Recent content by DARKSeifer

I still misspell sometimes. In my two native languages "motor" is used to name any device that turns any source of energy into mechanical energy and both engine/motor translate the same. You can specify the source of energy, but in general is just redundant.

The Evo II isn't available in Amazon in my country, only Lite+ and Nano+, maybe when the Evo III comes out I'm coming back to Autel to get rid of the Aeroscope, but I prefer to buy cameras, drones, PC parts, etc from Amazon because the warranty works well, while on other sellers you never know...

So after about 160-200 flight hours of flight time, the engines do strange things and don't keep the RPM. You start the motors and some start and some fail/retry for several attempts. If you manage to start the 4 you can fly normally, but if they don't start and you press up the drone will just...

If you are indoors it will not find stalleites. It gives you the option to unlock Atti mode, which is flying without GPS but note that in Atti the drone will drift in the wind and RTH will not work.

Lite+ behavior when detecting a hand beneath it is different from DJI drones. A DJI drone would rise a bit when the hand is detected, and then you would move the stick down and grab it while it's descending towards the hand. The Lite+ don't move at all when you put your hand beneath it, so you...

Opposite to DJI drones, sensors can't be calibrated on the Lite+... or at least I'm not aware of any way to do it.

Check the cable connection between the controller and the phone, if the USB-C is loosy it may freeze or not work. Controller is independent from the phone, you just need to pair it with the drone and you can start the motors and fly without even a phone connected, it's the same for most...

Yep it's 60 something, but can't maintain 68Km/h even with a tailwind, it's mostly a hardware bottleneck. Maybe with new props and a bit of WD/40 to the motors you can get a more constant high speed, but engines are not that powerful. My previous Air2S and Mini 2 were more on the software...

About 54Km/h or for the most part, with the wind in your back and diving maybe 60 or so, but I usually fly in normal mode at 32Km/h.

It doesn't work on the Lite+, it just doesn't care about what it's on the SD, I tried with the firmware compressed, uncompressed, uncompressed but in the folder, in root, in the SD, in the internal memory, with different phones, different SDCards, etc. It can only be updated through the...

Yep, Aeroscope can't be hacked/disabled, Aeroscope systems are just universal "listeners" that can receive and save all the telemetry, serial number, email direction, etc from any DJI drone nearby... and they don't even need to be flying. Just turn on your DJI Mini on the table inside your house...

If you are going to fly always within the rules and with the drone limited buy DJI, if not Autel is the way because otherwise you'll get eventually busted by DJI Aeroscope, specially in Europe. Lite+ has some software issues mainly (I can't update to the last firmware for example), but it's a...

800m from the takeoff point is the limit. If you take off from the middle of the mountain instead from the bottom then you have +/-800m range in vertical, so 1600m in total. This is a software limit, foldable consumer drones ceiling is around 4000-6000m above the sea level, you can hack the DJI...

Autel Evo Lite is not meant to be a professional grade drone or at least not like the Evo II or the future Evo III so I wouldn't expect compatibility with advanced features. You need an adroid/ios device in order to get video feed from the controller, then you can mirror that screen to other...

After giving up I only try once a day before the first flight... has failed around 30 times or more, always at 20%. 😆