Problem Loading a UgCS Created Mission

[Joseph Hobbs]

I've created a terrain-following photogrammetry mission with a flight height (altitude) of 325 feet AGL in UgCS and loaded it to Autel Explorer on the V2 remote controller.
The mission file format is "As a line string" and "Relative to the ground under the 1st waypoint"
Explorer accepts the file and displays the waypoints and flight track.
Instead of flight altitudes of 325 feet AGL, the waypoint elevations increase to more than 500 AGL
Any ideas on how to correct the waypoint altitudes?

Because altitudes in the mission are greater than 400 feet, Explorer will not fly the drone.

 

[Dave Pitman]

No experience with UgCS. When you open the mission in AE, do the waypoint elevations makes sense, or are the too high relative to the take-off point?




You might ask UgCS support?

 

[Joseph Hobbs]

No experience with UgCS. When you open the mission in AE, do the waypoint elevations makes sense, or are the too high relative to the take-off point?

View attachment 14449


You might ask UgCS support?

Correct, the flight altitudes in AE are 200 ft to 250 ft too high. BTW ground elevations in the UcGS terrain model correlate with GNSS values at about 2 to 3 meters. Is there a parameter in the AE that could change input altitudes?

 

[Detritalgeo]

did you follow their youtube tutorial, just checking