Autel EVO II Enterprise Series Unveiled!

[advexure]

The Autel EVO II Enterprise Series has been officially unveiled – featuring add-on modules consisting of a speaker, search light and strobe, enhanced dual band transmission, carbon fiber arm design, larger motors and propellers, ADS-B receiving and encrypted internal and external storage.

Available in three models – 6K Pro, 640T Thermal and FLIR Dual R Thermal models and includes Autel's 7.9" 2000-nit Smart Controller.

The EVO II Enterprise is now available for pre-order from Advexure and tentatively estimated to begin shipping in late September.

View the EVO II Enterprise Models​

• EVO II Pro 6K Enterprise: Autel EVO II Pro 6K Enterprise Bundle
• EVO II 640T (InfiRay) Enterprise: Autel EVO II 640T (Thermal) Enterprise Bundle
• EVO II Dual R (FLIR) Enterprise: Autel EVO II Dual R (FLIR Thermal) Enterprise Bundle

Frequently Asked Questions​

1) Is the EVO II Enterprise V1 or V2?
All EVO II Enterprise airframes and Smart Controllers are V2.​

​

2) What is the EVO II Enterprise flight time and battery run time of the Smart Controller?
The maximum flight time (spec'd) flight time is 42 minutes with no wind and no accessories. In hover flight, using the strobe accessory users can expect about 38 minutes, 29 minutes with the spotlight, 34 minutes with the speaker, and 36 minutes with the RTK module. The run time of the Smart Controller is about 3 hours at maximum brightness and 4.5 hours at 50% brightness.​

​

3) Is the RTK Module included with the EVO II Enterprise?
No, the RTK Module will be available separately for purchase.​

​

4) What is the country of origin for this system?
The EVO II Enterprise is Made in China.​

​

5) Does Autel's Smart Controller have HDMI out?
Yes, the Smart Controller has an HDMI out port on its rear.​

​

6) Is the EVO II Enterprise compatible with Live Deck?
No, currently there is no Live Deck option for the EVO II Enterprise and current Live Decks are not compatible as they are V1, while the EVO II Enterprise is V2.​

​

7) Are the camera payloads for the EVO II Enterprise interchangeable / swappable?
Absolutely, camera/gimbal payloads can be swapped with any EVO II camera/gimbal of your choosing. Please check the Advexure website to locate "camera only" units for the EVO II series.​

​

8) Can I use more than one accessory module at a time?
No, only one accessory can be used at a time as there is only one accessory port.​

​

Further questions on the EVO II Enterprise, please reply in the thread below.

Have a safe and enjoyable Labor Day!
–The Advexure Team

 

[advexure]

Autel EVO II Enterprise meets DJI Mavic 2 Enterprise

 

[Dave Pitman]

Your "in the box" info is correct, but you may want to remove one of the batteries from the product page image on the Pro bundle to reduce confusion!

Autel EVO II Pro 6K Enterprise Bundle

The Autel EVO II Pro 6K Enterprise Bundle is Autel Robotics' newest model to join the EVO II family. The EVO II Enterprise boasts a maximum flight time of 42 minutes and allows for the installation of add-on modules onto the hood of the aircraft. These add-on modules include the speaker...

advexure.com

Cheers!
Dave

 

[advexure]

Hey @Dave Pitman, you are 100% correct and this was just fixed. Thanks

 

[PingSpike]

encrypted internal and external storage

Yet still no encryption between the drone and the controller

The ADS-B is a nice addition

 

[edgardcafe]

The Autel EVO II Enterprise Series has been officially unveiled – featuring add-on modules consisting of a speaker, search light and strobe, enhanced dual band transmission, carbon fiber arm design, larger motors and propellers, ADS-B receiving and encrypted internal and external storage.

Available in three models – 6K Pro, 640T Thermal and FLIR Dual R Thermal models and includes Autel's 7.9" 2000-nit Smart Controller.

The EVO II Enterprise is now available for pre-order from Advexure and tentatively estimated to begin shipping in late September.

View attachment 11472

View the EVO II Enterprise Models​

• EVO II Pro 6K Enterprise: Autel EVO II Pro 6K Enterprise Bundle
• EVO II 640T (InfiRay) Enterprise: Autel EVO II 640T (Thermal) Enterprise Bundle
• EVO II Dual R (FLIR) Enterprise: Autel EVO II Dual R (FLIR Thermal) Enterprise Bundle

Frequently Asked Questions​

1) Is the EVO II Enterprise V1 or V2?​

All EVO II Enterprise airframes and Smart Controllers are V2.​

​

2) What is the EVO II Enterprise flight time and battery run time of the Smart Controller?​

The maximum flight time (spec'd) flight time is 42 minutes with no wind and no accessories. In hover flight, using the strobe accessory users can expect about 38 minutes, 29 minutes with the spotlight, 34 minutes with the speaker, and 36 minutes with the RTK module. The run time of the Smart Controller is about 3 hours at maximum brightness and 4.5 hours at 50% brightness.​

​

3) Is the RTK Module included with the EVO II Enterprise?​

No, the RTK Module will be available separately for purchase.​

​

4) What is the country of origin for this system?​

The EVO II Enterprise is Made in China.​

​

5) Does Autel's Smart Controller have HDMI out?​

Yes, the Smart Controller has an HDMI out port on its rear.​

​

6) Is the EVO II Enterprise compatible with Live Deck?​

No, currently there is no Live Deck option for the EVO II Enterprise and current Live Decks are not compatible as they are V1, while the EVO II Enterprise is V2.​

​

7) Are the camera payloads for the EVO II Enterprise interchangeable / swappable?​

Absolutely, camera/gimbal payloads can be swapped with any EVO II camera/gimbal of your choosing. Please check the Advexure website to locate "camera only" units for the EVO II series.​

​

8) Can I use more than one accessory module at a time?​

No, only one accessory can be used at a time as there is only one accessory port.​

​

Further questions on the EVO II Enterprise, please reply in the thread below.

Have a safe and enjoyable Labor Day!
–The Advexure Team

View attachment 11473View attachment 11474View attachment 11475

I already preorder mine at @advexure !

 

[edgardcafe]

Hey @Dave Pitman, you are 100% correct and this was just fixed. Thanks

There are some confusion because someone just post in Facebook that the drone comes with a battery inside and 2 extras so I don’t know

 

[Dave Pitman]

Hey @Dave Pitman, you are 100% correct and this was just fixed. Thanks

It is still being suggested on the FB page that the Pro bundle will include 3 batteries the same as the other bundles. They included a packing list image that shows 1 battery with the craft and 2 additional.
It's kind of funny how basic info can become distorted.

 

[Dave Pitman]

There are some confusion because someone just post in Facebook that the drone comes with a battery inside and 2 extras so I don’t know

Yes indeed. We were posting at the same time!

 

[edgardcafe]

Yes indeed. We were posting at the same time!

Exactly!!!

 

[John Lord]

The Autel EVO II Enterprise Series has been officially unveiled – featuring add-on modules consisting of a speaker, search light and strobe, enhanced dual band transmission, carbon fiber arm design, larger motors and propellers, ADS-B receiving and encrypted internal and external storage.

Available in three models – 6K Pro, 640T Thermal and FLIR Dual R Thermal models and includes Autel's 7.9" 2000-nit Smart Controller.

The EVO II Enterprise is now available for pre-order from Advexure and tentatively estimated to begin shipping in late September.

View attachment 11472

View the EVO II Enterprise Models​

• EVO II Pro 6K Enterprise: Autel EVO II Pro 6K Enterprise Bundle
• EVO II 640T (InfiRay) Enterprise: Autel EVO II 640T (Thermal) Enterprise Bundle
• EVO II Dual R (FLIR) Enterprise: Autel EVO II Dual R (FLIR Thermal) Enterprise Bundle

Frequently Asked Questions​

1) Is the EVO II Enterprise V1 or V2?​

All EVO II Enterprise airframes and Smart Controllers are V2.​

​

2) What is the EVO II Enterprise flight time and battery run time of the Smart Controller?​

The maximum flight time (spec'd) flight time is 42 minutes with no wind and no accessories. In hover flight, using the strobe accessory users can expect about 38 minutes, 29 minutes with the spotlight, 34 minutes with the speaker, and 36 minutes with the RTK module. The run time of the Smart Controller is about 3 hours at maximum brightness and 4.5 hours at 50% brightness.​

​

3) Is the RTK Module included with the EVO II Enterprise?​

No, the RTK Module will be available separately for purchase.​

​

4) What is the country of origin for this system?​

The EVO II Enterprise is Made in China.​

​

5) Does Autel's Smart Controller have HDMI out?​

Yes, the Smart Controller has an HDMI out port on its rear.​

​

6) Is the EVO II Enterprise compatible with Live Deck?​

No, currently there is no Live Deck option for the EVO II Enterprise and current Live Decks are not compatible as they are V1, while the EVO II Enterprise is V2.​

​

7) Are the camera payloads for the EVO II Enterprise interchangeable / swappable?​

Absolutely, camera/gimbal payloads can be swapped with any EVO II camera/gimbal of your choosing. Please check the Advexure website to locate "camera only" units for the EVO II series.​

​

8) Can I use more than one accessory module at a time?​

No, only one accessory can be used at a time as there is only one accessory port.​

​

Further questions on the EVO II Enterprise, please reply in the thread below.

Have a safe and enjoyable Labor Day!
–The Advexure Team

View attachment 11473View attachment 11474View attachment 11475

Do you have all the same camera settings with the Evo II Enterprise that you have with the Evo II Pro, specifically can you take RAW still images as well as setting the Exposure parameters i.e. Aperture, Shutter Speed and ISO. With the DJI Enterprise Advanced you don't have much control over the camera plus you can only take still jpg images.

 

[advexure]

Do you have all the same camera settings with the Evo II Enterprise that you have with the Evo II Pro, specifically can you take RAW still images as well as setting the Exposure parameters i.e. Aperture, Shutter Speed and ISO. With the DJI Enterprise Advanced you don't have much control over the camera plus you can only take still jpg images.

Yes, on the Pro Enterprise you have all of the same settings as the regular EVO II Pro.

 

[SARty]

@advexure How do the real world flight times compare with the standard versions?

 

[advexure]

@advexure How do the real world flight times compare with the standard versions?

We're seeing about 5-7 minutes of additional flight time on the Enterprise model. Larger props and lighter carbon fiber arms are making a good difference. Also the larger propellers yield a much quieter flight.

 

[Dave Pitman]

what is the diameter (length) of the props?

 

[DadCorso80]

@advexure Will the RTK module be released late September as well for purchase? Have you had an opportunity to test the RTK module with the Pro Enterprise yet?

 

[SARty]

We're seeing about 5-7 minutes of additional flight time on the Enterprise model. Larger props and lighter carbon fiber arms are making a good difference. Also the larger propellers yield a much quieter flight.

Thanks. That’s a decent improvement. Out of curiosity, what is the total flight time averaging and what battery percentage are you landing at?

 

[advexure]

@advexure Will the RTK module be released late September as well for purchase? Have you had an opportunity to test the RTK module with the Pro Enterprise yet?

We have not yet received info on the RTK Module for separate purchase. Hopefully they will be available around the same time that EVO II Enterprise units begin shipping.

We will hopefully get a Pro/6K camera module installed on our EVO II Enterprise (640T) soon and our geospatial folks will do some T&E with the RTK module.

 

[Blade Strike]

@advexure Will the RTK module be released late September as well for purchase? Have you had an opportunity to test the RTK module with the Pro Enterprise yet?

I have. Works the same as the Autel RTK and PPK is working.

unlike DJI , our craft geo tags datasets.

 

[Dave Pitman]

Ken, (@Blade Strike) any progress on getting the image manipulation resolved? By the time the Entprise kits start shipping, it would be cool if the z-axis error could be tamed a bit.